OWC 32GB DDR3L 1600 CL11 4Rx4 1.35V ECC Registered RDIMM 240-pin memory upgrade
- 32GB
- 240-Pin DDR3L ECC R…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
32 GB DDR3L 1600 ECC registered kit for HP ProLiant DL380e Gen8, DL560 Gen8 and SL4540 Gen8 servers
Capacity 32GB (2 x 16GB)
This 32 GB kit contains two 16 GB DDR3L 1600 CL11 registered DIMMs built for HP ProLiant DL380e Gen8, DL560 Gen8 and SL4540 Gen8 systems. The modules run at 1.35 V and include error-correcting code for data integrity in server workloads. They are 240-pin 2Rx4 RDIMMs without heat spreaders. The kit replaces several HP part numbers including 684316181 and 713985B21.
Administrators expanding memory in the listed ProLiant models can use this kit to extend platform life or reduce build cost. It will not work in standard desktop PCs or consumer laptops because those platforms require unbuffered non-ECC DIMMs. Builders who need unregistered modules or a different pin count must choose a different product.
The modules are registered ECC RDIMMs organised as 2Rx4, a requirement for the target ProLiant memory controllers. Mixing these with unbuffered DIMMs is not supported and will prevent boot. Verify that the server’s memory population rules allow 2Rx4 registered modules before installation.
| Brand | OWC |
|---|---|
| Part Number | 1R6T32R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant DL380e Gen8 HP ProLiant DL560 Gen8 HP ProLiant SL4540 Gen8 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Power down the server, open the chassis, align each 240-pin module with the DIMM slot key, press firmly until both retention clips click, then verify in BIOS that all 32GB are detected at 1600 MHz CL11. The step often missed is confirming the memory mode matches the registered ECC configuration.
The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server airflow clean. Replacement is only required if a DIMM fails ECC correction or the system logs uncorrectable errors.
The DDR3L 1.35 V JEDEC voltage ceiling is reached before thermal throttling, capping sustained throughput at the rated PC3L-12800 speed.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?