We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 240-pin DDR3L ECC registered DIMMs in static bags

OWC

OWC 32GB (2x16GB) DDR3L 1600 PC3L-12800 CL11 ECC Registered RDIMM memory upgrade

SKU CH-T58Q-YB2WC

32 GB DDR3L 1600 ECC registered RDIMM kit for HP ProLiant Gen8 servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands memory capacity for virtualization
  • DDR3L 1600 CL11 at 1.35 V reduces power draw versus standard DDR3
  • Qualified for HP ProLiant ML350e G8, ML350p G8, SL210t G8, SL230s G8
  • Replaces HP part numbers 684316181, 688963001, 713756081, 713985B21, 715284001

OWC 32GB DDR3L ECC Registered Kit

This OWC kit provides 32GB of DDR3L ECC Registered memory in a matched pair of 16GB modules. It runs at 1600MHz with CL11 latency and operates at 1.35V. The 240-pin RDIMM form factor is built for HP ProLiant Gen8 servers and workstations.

Suited for Gen8 ProLiant upgrades

The modules are validated for ML350e Gen8, ML350e Gen8 v2, ML350p Gen8, SL210t Gen8 and SL230s Gen8 systems. They replace HP part numbers including 684316181 and 713985B21. Builders needing unbuffered memory or non-ECC DIMMs cannot use this registered kit.

Registered ECC RDIMM requirement

The single specification that decides fit is the registered ECC RDIMM design with 2Rx4 organisation. Standard desktop boards and consumer laptops do not support this module type. Only systems listed in the compatibility list will accept the kit.

Highlights

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands memory capacity for virtualization
  • DDR3L 1600 CL11 at 1.35 V reduces power draw versus standard DDR3
  • Qualified for HP ProLiant ML350e G8, ML350p G8, SL210t G8, SL230s G8
  • Replaces HP part numbers 684316181, 688963001, 713756081, 713985B21, 715284001

Specifications

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant ML350e Gen8
HP ProLiant ML350e Gen8 v2
HP ProLiant ML350p Gen8
HP ProLiant SL210t Gen8
HP ProLiant SL230s Gen8

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What server or workstation models must I already have to install this 240-pin DDR3L 1600 ECC Registered RDIMM kit?

This kit is validated for HP ProLiant ML350e Gen8, ML350e Gen8 v2, ML350p Gen8, SL210t Gen8 and SL230s Gen8 systems that accept 240-pin DDR3L ECC Registered DIMMs.

Can I keep my existing unbuffered DDR3L modules and add these two 16 GB 2Rx4 registered sticks alongside them?

No — the manufacturer highlights state this registered memory cannot be mixed with unbuffered modules; all installed DIMMs must be ECC Registered for the server to operate correctly.

After seating both 16 GB modules, how can I confirm the kit is running at PC3L-12800 CL11 with ECC active?

Enter the system BIOS or iLO interface and verify the memory speed shows 1600 MT/s, CAS latency 11, voltage 1.35 V and ECC status reported as enabled for all 32 GB.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.