We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with gold contacts and black chips

OWC

OWC 32GB (2x16GB) DDR5 4800 CL40 SODIMM laptop RAM

SKU CH-367B-NVJ06

Dual-channel 32 GB kit with two 16 GB DDR5 4800 CL40 SODIMM modules at 1.1 V for laptops and all-in-one systems

  • Capacity32GB (2 x 16GB)
  • Type262-Pin DDR5 SO-DIMM
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 32GB (2 x 16GB)

  • Dual-channel kit doubles bandwidth with two 16 GB modules
  • DDR5 4800 MT/s speed accelerates data-intensive workloads
  • CL40 latency and 1.1 V operation reduce power draw
  • 262-pin SODIMM form factor fits laptops and all-in-one systems
  • JEDEC and RoHS compliant for warranty-safe upgrades

OWC DDR5 SODIMM Kit

This OWC kit supplies 32 GB of DDR5 laptop memory in a matched pair of 16 GB modules. It uses the 262-pin SO-DIMM form factor and runs at 4800 MHz with a CL40 latency. The modules operate at 1.1 V and are unbuffered, non-ECC components built to JEDEC standards.

Suitable for DDR5 laptops and NAS units

The kit fits laptops, all-in-one desktops and NAS systems that accept DDR5 SO-DIMMs and can use a dual-channel 32 GB configuration. Systems that require registered or ECC memory cannot use these modules. Buyers needing a single module or a different total capacity should select another kit.

CL40 latency at 4800 MHz

The CAS latency of CL40 at the rated 4800 MHz speed is the key timing figure that determines whether this kit matches the memory controller requirements of a specific platform.

Highlights

  • Dual-channel kit doubles bandwidth with two 16 GB modules
  • DDR5 4800 MT/s speed accelerates data-intensive workloads
  • CL40 latency and 1.1 V operation reduce power draw
  • 262-pin SODIMM form factor fits laptops and all-in-one systems
  • JEDEC and RoHS compliant for warranty-safe upgrades

Specifications

BrandOWC
Part Number4S8D51R8032P
Capacity32GB (2 x 16GB)
Type262-Pin DDR5 SO-DIMM
CAS LatencyCL40
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does this kit need a 262-pin SO-DIMM slot?

Yes, each module uses the standard 262-pin DDR5 SO-DIMM form factor found in current laptops and all-in-one systems.

Is there a notch or key position I should check before pressing the modules in?

Align the off-centre notch on the module with the slot key, press firmly until the side clips click, and verify both 16 GB sticks are fully seated for dual-channel operation.

Will the memory require any firmware updates or battery replacements over time?

No, the modules are non-volatile DRAM with no onboard battery or firmware; they operate at 1.1 V and only need occasional dust removal from the contacts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.