We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3L ECC registered DIMMs 240-pin 1.35V

OWC

OWC 32GB (4x8GB) DDR3L 1333 ECC Registered RDIMM for Cisco UCS B440 M2

SKU CH-S6QJ-A88RA

32 GB kit of four 8 GB DDR3L 1333 ECC registered RDIMMs for Cisco UCS B440 M2 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands Cisco UCS B440 M2 memory capacity
  • DDR3L 1333 MHz CL9 at 1.35 V matches system specifications
  • 240-pin RDIMM 2Rx4 form factor fits the qualified server slots
  • Replaces Cisco part numbers N01M308GB2, UCSMR1X082RXA, UCSMR2X082RXB, UCSMR2X082RXC

Target Server Upgrade

This 32GB kit contains four 8GB DDR3L ECC Registered RDIMMs built for the Cisco UCS B440 M2 blade server. It is intended for administrators who need to expand memory capacity in that specific platform. The modules will not work in standard desktop computers and cannot be mixed with unbuffered or load-reduced memory types.

Capacity and Headroom

The kit delivers 32GB total across four slots, running at DDR3L 1333 (PC3L-10600) with CL9 latency and a 2Rx4 organisation. It provides headroom for virtualisation workloads and larger datasets within the supported server. Capacity is limited to the 32GB supplied; larger configurations would require additional compatible modules and available DIMM slots.

Thermals and Power

Operating at 1.35V, the low-voltage DDR3L modules draw less power than standard DDR3 equivalents. No heat spreaders are fitted, so airflow through the server chassis manages thermals. The registered buffer adds minimal overhead, keeping power draw and acoustic impact low during normal operation.

Highlights

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands Cisco UCS B440 M2 memory capacity
  • DDR3L 1333 MHz CL9 at 1.35 V matches system specifications
  • 240-pin RDIMM 2Rx4 form factor fits the qualified server slots
  • Replaces Cisco part numbers N01M308GB2, UCSMR1X082RXA, UCSMR2X082RXB, UCSMR2X082RXC

Specifications

BrandOWC
Part Number1R3T32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B440 M2

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will these 1.35V DDR3L RDIMMs run alongside existing 1.5V DDR3 modules already installed in my B440 M2?

Mixing 1.35V DDR3L with 1.5V DDR3 is not recommended; the server will default to the higher voltage and may cause instability. For reliable operation, replace all modules with matching DDR3L 1333 CL9 2Rx4 registered DIMMs.

How can I verify the kit is running at PC3L-10600 CL9 with ECC active after installation?

Enter the Cisco UCS BIOS or CIMC interface and confirm memory speed shows 1333 MHz, voltage reads 1.35V, CAS latency is CL9, and ECC status reports enabled across all four slots.

Does the 32GB kit include only the four 8GB RDIMMs, or are heat spreaders and a configuration guide also supplied?

The package contains four 8GB 240-pin DDR3L ECC registered RDIMMs (part 1R3T32R4032S) with no heat spreaders; no printed guide or additional accessories are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.