We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 32GB (4x8GB) DDR3L 1600 ECC Registered RDIMM Kit for Dell PowerEdge M610 M610X M710 M710HD

SKU CH-XBD8-QNXMV
  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design prevents data errors in critical workloads
  • 32 GB kit with four 8 GB modules expands server capacity
  • DDR3L 1600 MHz CL11 at 1.35 V balances speed and power efficiency
  • 240-pin RDIMM form factor fits Dell PowerEdge M610 M610X M710 M710HD
  • Replaces Dell part numbers A7134886 A7545680 RKR5J SNPRKR5JC/8G

Dell PowerEdge server memory kit

This OWC kit delivers 32 GB of DDR3L 1600 ECC registered memory across four 8 GB modules. The 240-pin RDIMMs run at 1.35 V with CL11 latency and 1Rx4 organisation. They are validated for Dell PowerEdge M610, M610X, M710 and M710HD blade servers.

Suits administrators upgrading compatible Dell

This memory is built for registered ECC slots in server platforms only. It will not work in standard desktop PCs or consumer laptops that require unbuffered non-ECC DIMMs. Buyers needing unbuffered modules or higher-density sticks for other platforms should look elsewhere.

Registered ECC with 1Rx4 layout

The modules use registered ECC signalling and a single-rank 1Rx4 configuration. This combination determines compatibility with the target PowerEdge memory controllers. Verify that your system requires registered ECC RDIMMs before purchasing.

Highlights

  • ECC registered design prevents data errors in critical workloads
  • 32 GB kit with four 8 GB modules expands server capacity
  • DDR3L 1600 MHz CL11 at 1.35 V balances speed and power efficiency
  • 240-pin RDIMM form factor fits Dell PowerEdge M610 M610X M710 M710HD
  • Replaces Dell part numbers A7134886 A7545680 RKR5J SNPRKR5JC/8G

Specifications

BrandOWC
Part Number1R6T31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge M610
Dell PowerEdge M610X
Dell PowerEdge M710
Dell PowerEdge M710HD

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the 32GB DDR3L 1600 kit is running at 1.35V and CL11 after installation?

Enter the server BIOS or use a tool like CPU-Z to verify the detected speed shows PC3L-12800, voltage reads 1.35V and CAS latency reports CL11 for each of the four 8GB modules.

What exactly ships in the box and is anything else required to install the memory?

The box contains four 8GB 240-pin DDR3L ECC registered RDIMM modules (part 1R6T31R4032S); no extra cables, brackets or software are needed — just open the chassis and seat the DIMMs in the approved slots.

Which capacity version should I choose if my PowerEdge M610 currently has 16GB and I want the maximum supported by this kit?

Select the 32GB (4 x 8GB) kit; it replaces the existing 16GB with the full 32GB capacity this part number provides for the M610, M610X, M710 and M710HD.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.