OWC 16GB DDR4 2666 ECC Registered RDIMM D4RD-2666-16G RS18017xs+ server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
32 GB DDR4 2666 ECC registered RDIMM for Synology FlashStation SA3400, SA410, SA3600 and SA3610 NAS systems
Capacity 32GB
Rank 2Rx4
This 32GB DDR4 2666 ECC Registered RDIMM is built for servers, workstations and NAS systems that require registered memory with error correction. It will not work in standard desktop computers and cannot be mixed with unbuffered or load-reduced modules. The single 288-pin module runs at 1.2V with CL19 latency and a 2Rx4 rank configuration.
Without a heat spreader the module relies on system airflow, drawing 1.2V at the JEDEC-standard voltage for DDR4. Registered buffering reduces electrical load on the memory controller, helping keep power draw predictable during typical multi-user workloads. The design targets quiet, stable operation in rackmount and tower chassis where fan curves are tuned for sustained throughput rather than burst speed.
ECC detection and correction operates continuously, protecting data integrity during long compute jobs or 24/7 NAS services. Backward compatibility with 2133MHz and 2400MHz buses allows the DIMM to clock down automatically when the platform demands it, maintaining stability without manual tuning. The registered architecture keeps signal quality consistent across fully populated channels during extended heavy traffic.
| Brand | OWC |
|---|---|
| Part Number | 2R6D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Power off the NAS, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both side clips click, then verify in DSM that the 32GB module is recognised at 2666 MHz; the step often missed is seating the module fully so both clips engage.
No routine maintenance is required; the module has no heat spreader and runs at 1.2V, so replacement is only needed if a memory error appears or capacity must be increased beyond the single 32GB DIMM.
The first limit is the JEDEC-standard 1.2V voltage and CL19 latency ceiling; the module cannot exceed 2666 MHz and will throttle or error if the system requests higher speed or lower latency than specified.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?