OWC 32GB DDR4 3200 PC4-25600 CL22 2Rx4 288-pin ECC Registered RDIMM memory upgrade
- 32GB
- 288-Pin DDR4 ECC RD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
A 32 GB DDR4 3200 ECC registered RDIMM with CL22 latency, 2Rx4 organisation and 1.2 V operation for compatible Gigabyte servers
This OWC module delivers 32GB of DDR4 3200 registered memory with ECC error correction for compatible Gigabyte server platforms. The single 288-pin DIMM operates at 1.2V with CL22 latency and a 2Rx4 rank configuration. It is designed for workstations, servers and NAS systems that require registered ECC memory and cannot accept unbuffered or load-reduced modules.
Running at 1.2 volts, the module draws minimal power while maintaining JEDEC-standard timing at 3200MHz. Registered buffering reduces electrical load on the memory controller, contributing to stable thermals in multi-DIMM server configurations. No heat spreader is fitted, so airflow across the bare PCB handles dissipation in typical chassis designs.
The module is validated for Gigabyte R182-N20, R182-NA0, R182-NA1, R182-NC0 and R182-P91 systems and will not work in standard desktop motherboards. It cannot be mixed with unbuffered or load-reduced ECC DIMMs, so all slots must use registered ECC memory. Backward compatibility with 2133, 2400, 2666 and 2933MHz speeds allows use in slower memory buses without configuration changes.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | 22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Gigabyte R182-N20 Gigabyte R182-NA0 Gigabyte R182-NA1 Gigabyte R182-NC0 Gigabyte R182-P91 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Power down the server, open the chassis, align the module notch with the slot key, press firmly until both retention clips click, then enter the BIOS to confirm the 3200MHz speed is recognised — the step often missed is enabling the registered/ECC profile in BIOS.
No routine maintenance is required; the module has no heat spreader or moving parts. Replacement is only needed if a memory test reports uncorrectable ECC errors or the server fails to post with the DIMM installed.
The CAS latency of 22 cycles at 3200MHz sets the baseline response time; under sustained load the memory controller's thermal throttle point or the 1.2V voltage regulator limit will be reached before the module itself degrades.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?