OWC 32GB DDR4 3200 CL22 2Rx8 288-pin 1.2V Non-ECC UDIMM memory upgrade
- 32GB
- 288-Pin DDR4 Non-EC…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
32 GB DDR4 module running at 3200 MHz with CL22 latency and 1.2 V for HP ProDesk 480 G7 and 600 G6 systems
This 32GB DDR4 3200MHz CL22 module is built for HP ProDesk 480 G7 Tower, 600 G6 SFF and 600 G6 Tower systems. It delivers a straightforward capacity increase for office workstations that need more headroom for multitasking and larger datasets. The unbuffered non-ECC design matches the standard desktop memory architecture used in these models.
The module operates at the JEDEC DDR4 3200 (PC4 25600) specification with 1.2V voltage and CL22 latency. This is the maximum standard speed for this memory generation; no higher frequencies or tighter timings are supported by the JEDEC baseline. Systems that only support lower DDR4 speeds will downclock the module automatically to their maximum supported rate.
Installation follows the standard UDIMM procedure: power off, open the chassis, align the 288-pin module with the slot, and press until the retention clips engage. The main risk is mixing modules of different capacities, speeds or manufacturers, which can prevent the system from booting or force it to run at reduced stability. OWC recommends identical DIMMs across all populated slots for reliable operation.
| Brand | OWC |
|---|---|
| Part Number | 3U2D42R832GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP ProDesk 480 G7 Tower HP ProDesk 600 G6 SFF HP ProDesk 600 G6 Tower |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, this 32GB DDR4 3200MHz CL22 1.2V 288pin UDIMM is listed as compatible with the HP ProDesk 480 G7 Tower, 600 G6 SFF and 600 G6 Tower.
The module runs at DDR4 3200 (PC4-25600) with CL22 latency, providing the rated transfer rate when installed in a supported ProDesk 600 G6 system.
The 288-pin DDR4 UDIMM form factor matches the ProDesk 480 G7 and 600 G6 memory slots, allowing the module to operate at its specified 3200MHz rating.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?