OWC 32GB DDR4 3200 CL22 ECC Registered RDIMM 2Rx4 1.2V 288-pin memory upgrade
- 32GB
- 288-Pin DDR4 ECC RD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
32 GB DDR4 3200 ECC registered RDIMM for Gigabyte R272 server and workstation platforms
This 32GB DDR4 3200 ECC Registered RDIMM is built for the Gigabyte R272-P32, R272-P33, R272-Z30, R272-Z31 and R272-Z32 server and workstation platforms. It runs at 1.2V with CL22 latency and a 2Rx4 organisation. The module is not compatible with standard desktop computers and cannot be mixed with unbuffered or load-reduced memory.
Insert the 288-pin module into an available DDR4 RDIMM slot until the retention clips engage; no tools or firmware steps are required. Because this is registered ECC memory, the system must support registered DIMMs and ECC functionality, otherwise the server will not post. Mixing this stick with unbuffered or load-reduced modules will also prevent boot.
Confirm that your motherboard is one of the listed Gigabyte R272 models and that the BIOS is configured for registered ECC operation. Check how many RDIMM slots are free and whether the platform supports 2Rx4 density at 3200 MT/s or will down-clock to 2133, 2400, 2666 or 2933 MT/s. Ensure you are not planning to combine this module with unbuffered or load-reduced memory.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | 22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Gigabyte R272-P32 Gigabyte R272-P33 Gigabyte R272-Z30 Gigabyte R272-Z31 Gigabyte R272-Z32 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Enter the system BIOS or UEFI on the Gigabyte R272-Z30 and confirm the memory information shows 32GB capacity, DDR4 3200 speed, CL22 latency, 1.2V voltage and ECC Registered status.
The box contains one 32GB 288-pin DDR4 3200 PC4-25600 CL22 2Rx4 1.2V ECC Registered RDIMM. No additional components are required for installation in the Gigabyte R272-P33.
This module is a single 32GB stick rated for DDR4 3200 and will also run at 2133 2400 2666 and 2933 speeds on the Gigabyte R272-Z32. Select the 32GB option to add 32GB of ECC Registered memory.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?