We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 SODIMM module with black chips and gold edge contacts

OWC

OWC 3S2D41R808GB 8GB DDR4 3200 CL22 SODIMM memory upgrade

SKU CH-QWCF-27KFZ

8GB DDR4 3200 CL22 SODIMM upgrade for HP ProOne 400 G6, 440 G6, 440 G9 and 600 G6 all-in-one PCs

  • Capacity8GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • Boosts multitasking with 8GB DDR4 3200 CL22 module
  • JEDEC compliant 1.2V SODIMM ensures warranty safe upgrade
  • Tested for HP ProOne 400 G6 440 G6 440 G9 600 G6
  • 260 pin non ECC unbuffered design fits factory slot
  • Limited lifetime warranty with free tech support included

Targeted HP ProOne upgrade

This 8GB DDR4 SODIMM module is built for HP ProOne 400 G6, 440 G6, 440 G9 and 600 G6 all-in-one systems. It delivers 3200MHz speed with CL22 latency at 1.2V using a 260-pin unbuffered non-ECC design. The module suits office workers and IT teams who need a straightforward capacity increase for daily multitasking.

Replaces slower or smaller DDR4 SODIMMs

The upgrade makes sense when the existing ProOne ships with 4GB or a lower-speed DDR4 stick and the board has a free slot or can accept a larger single module. Moving to 8GB at 3200MHz PC4-25600 lifts throughput for browser-heavy workloads and larger documents. The jump is not worthwhile if the system already runs matched 3200MHz modules at maximum supported capacity.

Check slot count and maximum capacity

Verify how many SODIMM slots your specific ProOne model provides and what the manufacturer lists as the maximum supported memory per slot and in total. Confirm the current installed speed so the new module can run at its rated 3200MHz without downclocking. Ensure the BIOS is up to date for full compatibility with 1Rx8 8GB density modules.

Highlights

  • Boosts multitasking with 8GB DDR4 3200 CL22 module
  • JEDEC compliant 1.2V SODIMM ensures warranty safe upgrade
  • Tested for HP ProOne 400 G6 440 G6 440 G9 600 G6
  • 260 pin non ECC unbuffered design fits factory slot
  • Limited lifetime warranty with free tech support included

Specifications

BrandOWC
Part Number3S2D41R808GB
Capacity8GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProOne 400 G6
HP ProOne 440 G6
HP ProOne 440 G9
HP ProOne 600 G6

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 260-pin DDR4 SODIMM fit the memory slot in an HP ProOne 440 G9?

Yes, the module is a 260-pin DDR4 SODIMM and the compatible systems list includes the HP ProOne 440 G9.

What is the correct orientation step when inserting the module into the SODIMM slot?

Align the notch on the 260-pin module with the key in the slot, press down firmly until the side clips click into place.

Does the 8 GB DDR4 3200 CL22 module require any firmware update or periodic re-seating after installation?

No firmware update is needed; the JEDEC-compliant 1.2 V module is designed for long-term operation without re-seating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.