We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 2Rx8 204-pin 1.5V Non-ECC SODIMM HP TouchSmart 310 memory upgrade

SKU CH-H06C-P54J5

A 4 GB DDR3 SODIMM running at 1333 MHz CL9, built to JEDEC 1.5 V spec for the HP TouchSmart 310 series

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Boosts PC responsiveness with a 4GB DDR3 1333MHz module
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Designed and tested to meet or exceed OEM specifications
  • Easy DIY installation with 204-pin SODIMM form factor
  • Optimised for HP TouchSmart 310 series using DDR3 memory

HP TouchSmart 310 DDR3 Upgrade

This OWC module is a 4 GB DDR3 SODIMM built for HP TouchSmart 310 all-in-one PCs that use DDR3 memory. It runs at 1333 MHz with CL9 latency and 1.5 V operation. The 204-pin unbuffered non-ECC design matches the factory specification for a straightforward drop-in upgrade.

Suitable for compatible all-in-one owners.

Builders upgrading a supported TouchSmart 310 will gain extra capacity for multitasking and larger workloads. The single stick installs easily in the accessible SODIMM slot. Owners of laptops, mini PCs, NAS units or any system outside the TouchSmart 310 DDR3 series should look elsewhere because the firmware and pin-out are tailored to this model.

Single 4 GB DDR3 1333 CL9 SODIMM decides fit

The decisive specification is the 4 GB DDR3 1333 CL9 204-pin SODIMM at 1.5 V with 2Rx8 organisation. Matching these exact parameters ensures the module will be recognised and run stably in the TouchSmart 310. Any deviation in capacity, speed, latency, voltage or rank will prevent correct operation.

Highlights

  • Boosts PC responsiveness with a 4GB DDR3 1333MHz module
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Designed and tested to meet or exceed OEM specifications
  • Easy DIY installation with 204-pin SODIMM form factor
  • Optimised for HP TouchSmart 310 series using DDR3 memory

Specifications

BrandOWC
Part Number1S3D32R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP TouchSmart 310 Series using DDR3 Memory

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2Rx8 rank configuration of this 4GB SODIMM ever need replacement under normal use?

The module has no moving parts and no heat spreader, so it does not require periodic replacement; it either works or it fails, in which case the limited lifetime warranty covers it.

What limit appears first when the TouchSmart 310 runs this PC3-10600 CL9 memory at full load for hours?

The platform's two-slot maximum of 8GB total capacity is reached before the module's own speed or latency limits become a bottleneck.

How much heat and power does the 1.5V unbuffered DDR3 module add when the all-in-one runs all day?

At 1.5V and without a heat spreader, the stick draws only a few watts and adds minimal heat to the TouchSmart 310's existing cooling system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.