We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold contacts and black memory chips

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 2Rx8 204-pin 1.5V Non-ECC SODIMM memory upgrade HP TouchSmart Elite 7320 9300

SKU CH-1NZ1-ZED88

A 4 GB DDR3 SODIMM running at 1333 MHz, CL9, 1.5 V, built for HP TouchSmart Elite 7320 and 9300 systems

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • 4 GB capacity adds multitasking headroom for HP TouchSmart Elite 7320 9300
  • DDR3 1333 PC3-10600 CL9 matches factory memory speed and timing
  • 5 V JEDEC standard voltage ensures stable operation without BIOS changes
  • 204-pin SODIMM form factor fits the laptop memory slot directly
  • Non-ECC unbuffered design works with consumer TouchSmart Elite platforms

OWC 4GB DDR3 SODIMM for HP TouchSmart

This 4GB DDR3 SODIMM module is built specifically for HP TouchSmart Elite 7320 and 9300 all-in-one systems. It provides a straightforward memory upgrade for owners of those models who need additional capacity for everyday multitasking.

Check DDR3 SODIMM slot availability first

Verify that your TouchSmart Elite 7320 or 9300 has a free 204-pin SODIMM slot and supports DDR3 1333 PC3-10600 memory at 1.5V. The module is non-ECC and unbuffered, so it must match the existing memory configuration for correct operation.

JEDEC standard build with 2Rx8 layout

The module follows JEDEC and RoHS standards without a heat spreader, keeping the low profile required for slim all-in-one chassis. Its 2Rx8 organisation and CL9 latency deliver reliable compatibility when installed in the designated memory slot.

Highlights

  • 4 GB capacity adds multitasking headroom for HP TouchSmart Elite 7320 9300
  • DDR3 1333 PC3-10600 CL9 matches factory memory speed and timing
  • 5 V JEDEC standard voltage ensures stable operation without BIOS changes
  • 204-pin SODIMM form factor fits the laptop memory slot directly
  • Non-ECC unbuffered design works with consumer TouchSmart Elite platforms

Specifications

BrandOWC
Part Number1S3D32R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP TouchSmart Elite 7320
HP TouchSmart Elite 9300

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the module ship alone or with any extra brackets or tools?

The box contains a single 4 GB DDR3 1333 PC3-10600 CL9 2Rx8 204-pin 1.5 V non-ECC SODIMM module. No brackets, screws or installation tools are included.

Should I pick a different capacity or speed for the HP TouchSmart Elite 7320 or 9300?

This part number 1S3D32R804GB is built specifically for those models at 4 GB DDR3-1333 CL9 1.5 V. Other capacities or speeds are not validated for these systems.

Will the CL9 1333 MHz rating deliver the full 10600 MB/s bandwidth once installed?

The module runs at JEDEC-standard DDR3-1333 CL9 1.5 V, so the system will operate it at the rated PC3-10600 throughput without manual tuning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.