We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold contacts and black memory chips

OWC

OWC 4GB DDR3L 1600 CL11 1.35V SODIMM 1S6T31R804GB memory upgrade

SKU CH-CDHE-3RHQV

A 4 GB DDR3L 1600 CL11 SODIMM for upgrading compatible QNAP NAS models

  • Capacity4GB
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • Boosts NAS responsiveness with 4 GB DDR3L 1600 CL11 module
  • Low 1.35 V DDR3L cuts power draw versus standard DDR3
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Single 1Rx8 204-pin SODIMM fits QNAP IS-453S, TS-1263U, TS-1263U-RP, TS-231P3, TS-431P3
  • Easy DIY install lets you add memory without specialist tools

Single 4 GB DDR3L SODIMM for QNAP NAS

This OWC module delivers 4 GB of DDR3L memory at 1600 MT/s with CL11 latency and 1.35 V operation. It uses a 204-pin unbuffered non-ECC design in a 1Rx8 configuration and carries JEDEC and RoHS compliance.

Suits owners of the listed QNAP models needing

The part matches the IS-453S, TS-1263U, TS-1263U-RP, TS-231P3 and TS-431P3. Builders who need ECC error correction, registered modules, higher capacity per stick or a different pin count should look elsewhere.

204-pin DDR3L SODIMM form factor

Only systems that accept 204-pin DDR3L SO-DIMMs at 1.35 V can use this module. A motherboard or NAS chassis wired for a different pin layout or voltage will not recognise the stick.

Highlights

  • Boosts NAS responsiveness with 4 GB DDR3L 1600 CL11 module
  • Low 1.35 V DDR3L cuts power draw versus standard DDR3
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Single 1Rx8 204-pin SODIMM fits QNAP IS-453S, TS-1263U, TS-1263U-RP, TS-231P3, TS-431P3
  • Easy DIY install lets you add memory without specialist tools

Specifications

BrandOWC
Part Number1S6T31R804GB
Capacity4GB
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemQNAP IS-453S
QNAP TS-1263U
QNAP TS-1263U-RP
QNAP TS-231P3
QNAP TS-431P3

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the DDR3L 1600 PC3L-12800 interface limit bandwidth to 12800 MB/s?

Yes, the PC3L-12800 rating caps the maximum theoretical bandwidth at 12800 MB/s for this module.

What physical slot does the 204-pin SODIMM need to fit in a QNAP TS-231P3?

It requires a standard 204-pin DDR3L SODIMM slot inside the NAS chassis.

How is the module installed and which step is often missed?

Power off the NAS, open the case, align the notch on the 204-pin edge connector, press firmly until the side clips click, then reassemble and power on.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.