We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board DDR4 memory module with black chips and gold edge contacts

OWC

OWC 4GB DDR4 2400 CL17 1.2V 288pin UDIMM HP OMEN 880 memory upgrade

SKU CH-FT9D-P554J

4GB DDR4 2400MHz CL17 1.2V 288-pin UDIMM for HP OMEN 880-012no, 880-013nb, 880-013no, 880-014no and 880-014nz

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 4GB DDR4 2400 CL17 adds responsive multitasking capacity
  • 2V JEDEC standard voltage keeps power draw low
  • 288-pin UDIMM fits HP OMEN 880 desktop slots directly
  • Non-ECC unbuffered design matches original system memory specification
  • Backward compatible with 2133MHz for flexible installation

HP OMEN 880 memory upgrade

This 4GB DDR4 module is built for HP OMEN 880 desktops including the 880-012no 880-013nb 880-013no 880-014no and 880-014nz. It adds 4GB of system memory to support everyday multitasking and larger workloads. The unbuffered non‑ECC UDIMM fits the standard 288‑pin DDR4 slot.

Thermals noise and power

The module runs at the JEDEC standard 1.2V and carries no heat spreader. It produces no audible noise and draws minimal power during normal operation. Backward compatibility with 2133MHz systems allows it to clock down automatically when installed in slower platforms.

Compliance and installation

The memory is 100 percent JEDEC compliant and ROHS compliant making it a warranty safe upgrade. OWC tests every module in house and provides a limited lifetime warranty with free technical support. An online installation video guides the DIY fitting process.

Highlights

  • 4GB DDR4 2400 CL17 adds responsive multitasking capacity
  • 2V JEDEC standard voltage keeps power draw low
  • 288-pin UDIMM fits HP OMEN 880 desktop slots directly
  • Non-ECC unbuffered design matches original system memory specification
  • Backward compatible with 2133MHz for flexible installation

Specifications

BrandOWC
Part Number2U4D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP OMEN 880-012no
HP OMEN 880-013nb
HP OMEN 880-013no
HP OMEN 880-014no
HP OMEN 880-014nz

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 288-pin DDR4 UDIMM in my HP OMEN 880, and what step is often missed?

Power off the PC, unplug it, open the case, align the notch on the module with the slot key, press firmly until both side clips click shut, then power on and verify the new 4GB appears in BIOS or Task Manager.

What maintenance or replacement will the OWC 4GB DDR4 2400 module need later?

No routine maintenance is required; the module has no heat spreader or moving parts. Replace it only if memory diagnostics report errors or you need more than 4GB capacity.

What limit appears first under sustained use with this CL17 1.2V DDR4 2400 UDIMM?

The 4GB capacity ceiling is reached before any thermal or speed throttle, since the unbuffered non-ECC module runs at standard 1.2V JEDEC voltage without a spreader.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.