We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, thin 260-pin SODIMM form factor, no heat spreader

OWC

OWC 4GB DDR4 2400MHz CL17 1.2V 260pin SODIMM for HP EliteDesk 705 G4 Mini 800 G3 Mini

SKU CH-HYGK-0S844
  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR4 2400MHz CL17 memory
  • Low 1.2V operation reduces power draw and heat
  • Fits HP EliteDesk 705 G4 Mini and 800 G3 Mini exactly
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Simple DIY install with 260-pin SODIMM form factor

4GB DDR4 2400MHz SODIMM for HP Mini

This 4GB DDR4 2400MHz CL17 SODIMM is built for the HP EliteDesk 705 G4 Mini and 800 G3 Mini. It runs at 1.2V as a 260-pin unbuffered non-ECC module. The 1Rx8 rank design meets JEDEC and RoHS standards for a direct, warranty-safe fit.

Who this suits and who it does not

It suits owners of those two Mini models who want a single 4GB stick to add or replace memory. It will not help builders needing ECC, registered DIMMs, a different voltage, a higher speed grade or capacities beyond 4GB per slot. Systems outside the listed HP Mini range are not supported.

JEDEC DDR4 2400 CL17 1.2V spec

The module operates at the JEDEC DDR4 2400 standard with CL17 timing and 1.2V voltage. That exact combination decides whether the memory will post and run stably in the target HP Mini platforms. Matching those three figures is the single check before purchase.

Highlights

  • Boosts system responsiveness with 4GB DDR4 2400MHz CL17 memory
  • Low 1.2V operation reduces power draw and heat
  • Fits HP EliteDesk 705 G4 Mini and 800 G3 Mini exactly
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Simple DIY install with 260-pin SODIMM form factor

Specifications

BrandOWC
Part Number2S4D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP EliteDesk 705 G4 Mini
HP EliteDesk 800 G3 Mini

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does this 1.2V DDR4 module generate much heat during continuous operation?

The module runs at the standard 1.2V DDR4 voltage and has no heat spreader, so it stays cool under normal all-day workloads inside the compact Mini chassis.

What slot type must my HP EliteDesk Mini have to accept this upgrade?

Your system needs a free 260-pin SODIMM slot; both the 705 G4 Mini and 800 G3 Mini use this form factor for memory expansion.

Can I mix this CL17 2400MHz stick with the original memory in my 705 G4 Mini?

OWC recommends matching capacity, speed and manufacturer for optimal performance, so using identical modules is advised.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.