OWC 256GB (4x64GB) DDR4 3200 PC4-25600 CL22 2Rx4 288-pin 1.2V ECC Registered RDIMM Memory Upgrade Kit
- 256GB (4 x 64GB)
- 288-Pin DDR4 ECC RD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
512GB DDR4 3200 ECC load-reduced quad-rank kit of four 128GB modules for HP SimpliVity 380 Gen10 servers
Capacity 512GB (4 x 128GB)
Struck-through versions exist but are not stocked here.
This OWC kit provides 512 GB of DDR4 ECC LRDIMM capacity across four 128 GB modules for the HP SimpliVity 380 Gen10. It targets administrators who need to maximise memory density in that specific server platform. The load-reduced design is required by the system and cannot be mixed with registered or unbuffered DIMMs. Buyers using standard desktop or consumer workstation boards cannot use this memory.
Each module runs at 3200 MT/s with CL22 latency at 1.2 V, and the kit is backward compatible with 2133, 2400, 2666 and 2933 MT/s bus speeds. ECC load-reduced architecture reduces electrical load on the memory controller during continuous workloads. The modules carry no heat spreader, so chassis airflow must handle thermal dissipation during extended duty cycles.
The 288-pin LRDIMM form factor fits only slots wired for DDR4 load-reduced memory in the supported server. Four modules populate four DIMM slots to reach the full 512 GB kit capacity. OWC validates every module in-house and the kit replaces HP part numbers including P06037-B21, P07652-B21 and P25206-B21.
| Brand | OWC |
|---|---|
| Part Number | 3L2D44R4512S |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | HP SimpliVity 380 Gen10 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Each module operates at 1.2V. Total power depends on the HP SimpliVity 380 Gen10 memory-controller load; the kit itself adds no separate power connector.
The server must support DDR4 288-pin Load-Reduced ECC memory and have four free DIMM slots; mixing with unbuffered or registered DIMMs is not supported.
Yes — the kit is backward-compatible with 2133, 2400, 2666 and 2933MHz speeds, so it will run at the lowest common speed populated.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?