We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3 ECC registered DIMMs in anti-static tray

OWC

OWC 64GB (4x16GB) DDR3 1333 ECC Registered DIMM memory upgrade for HP Workstation Z800

SKU CH-A1BE-T5Q87

Four 16 GB DDR3 1333 ECC registered DIMMs add 64 GB to an HP Workstation Z800

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • 64 GB kit expands Z800 memory capacity
  • Four matched 16 GB modules simplify installation
  • ECC registered design protects data integrity
  • DDR3 1333 CL9 meets JEDEC standard
  • 5 V 240-pin DIMMs fit Z800 slots

64GB DDR3 ECC Registered Kit for Z800

This OWC kit supplies 64GB of DDR3 1333 ECC Registered memory in four 16GB modules. It is built for the HP Workstation Z800 and follows JEDEC PC3-10600 CL9 timing at 1.5V. The 2Rx4 registered DIMMs are designed for workstation and server platforms that require error-correcting registered memory.

Replaces non-ECC or smaller registered sets

The kit upgrades a Z800 that currently runs unbuffered non-ECC DIMMs or a lower-capacity registered configuration. The jump is worthwhile when the workload needs ECC data integrity and the full 64GB capacity across all four slots. It will not benefit a standard desktop that cannot accept registered modules.

Verify Z800 registered DIMM support before ordering

Confirm the workstation accepts 240-pin DDR3 ECC Registered DIMMs at 1333 MT/s and 1.5V. The system must support 2Rx4 registered modules and cannot mix them with unbuffered memory. Check the Z800 service guide for the maximum supported capacity per slot and total population rules.

Highlights

  • 64 GB kit expands Z800 memory capacity
  • Four matched 16 GB modules simplify installation
  • ECC registered design protects data integrity
  • DDR3 1333 CL9 meets JEDEC standard
  • 5 V 240-pin DIMMs fit Z800 slots

Specifications

BrandOWC
Part Number1R3D32R4064S
Capacity64GB (4 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP Workstation Z800

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 240-pin DDR3 DIMMs fit the HP Z800 memory slots without a heat spreader?

Yes, the kit uses standard 240-pin DDR3 ECC registered DIMMs with no heat spreader, matching the Z800 slot layout.

What is the correct way to install the four 16 GB modules so the Z800 recognises all 64 GB?

Populate the slots in matched channel pairs as shown in the Z800 service guide; the common mistake is mixing registered and unbuffered DIMMs, which this kit avoids.

When should the ECC registered modules be replaced if error counts start rising?

ECC registered DDR3 DIMMs have no moving parts; replace only if the system logs uncorrectable errors or fails memory diagnostics.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.