OWC 1R6T32R4064S 64GB (4x16GB) DDR3L 1600 ECC RDIMM Supermicro X9DBU X9DR3 X9DR7 X9DRD X9DRE memory upgrade
- 64GB (4 x 16GB)
- 240-Pin DDR3L ECC R…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
64 GB ECC registered DDR3L kit at 1600 MHz CL11 for Supermicro H8 and X10 server boards
Capacity 64GB (4 x 16GB)
This OWC kit provides 64 GB of DDR3L ECC registered memory in four 16 GB modules. It is built for Supermicro H8QGL, H8SCM, X10DBT, X10QBi and X10QBL motherboards used in workstations and servers. The modules run at 1600 MHz with CL11 latency and 1.35 V operation. They will not work in standard desktop computers or alongside unbuffered DIMMs.
ECC registered design corrects single-bit errors and reduces electrical load on the memory controller during continuous workloads. The 1.35 V DDR3L voltage lowers power draw compared with standard DDR3, helping stability in densely populated servers. No heat spreader is fitted, so chassis airflow must carry heat away from the modules during long runs.
Verify that your motherboard model matches one of the listed Supermicro series and that all DIMM slots accept 240-pin registered DDR3L. The system BIOS must support 2Rx4 organisation and 64 GB total capacity across four slots. Do not mix these modules with unbuffered or non-ECC memory.
| Brand | OWC |
|---|---|
| Part Number | 1R6T32R4064S |
| Capacity | 64GB (4 x 16GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard H8QGL Series Supermicro Motherboard H8SCM Series Supermicro Motherboard X10DBT Series Supermicro Motherboard X10QBi Series Supermicro Motherboard X10QBL Series |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Each module operates at 1.35 V, the standard DDR3L voltage, so the four 16 GB sticks together consume less power than equivalent 1.5 V DDR3 kits under continuous load.
The kit is validated for Supermicro H8QGL, H8SCM, X10DBT, X10QBi and X10QBL series motherboards that support 240-pin DDR3L registered ECC DIMMs.
No — registered ECC modules cannot be mixed with unbuffered memory; all slots must use registered ECC DIMMs for the system to function correctly.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?