We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

OWC

OWC 64GB DDR4 2933 PC4-23400 CL21 2Rx4 288-pin 1.2V ECC Registered RDIMM memory upgrade

SKU CH-DEK4-QHWVW

Adds 64 GB DDR4-2933 ECC registered memory to compatible HP ProLiant Gen10 servers

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 64GB

  • 64 GB capacity extends server memory headroom
  • DDR4 2933 MHz CL21 speed supports demanding workloads
  • ECC registered design detects and corrects data errors
  • 2 V operation lowers power draw per module
  • Compatible with HP ProLiant BL460c DL325 DL360 DL380 DL385 Gen10

Server-grade ECC RDIMM

This OWC module is a 64GB DDR4 2933 PC4-23400 CL21 2Rx4 288-pin 1.2V ECC Registered RDIMM. It is built for workstations and servers that require registered error-correcting memory. The single stick adds substantial capacity to compatible HP ProLiant Gen10 platforms.

Replaces HP part numbers

The upgrade replaces HP part numbers P19045-K21, P19045-B21, P00930-H21, P14636-001, P00930-K21, P06192-001, P03053-CA1, P00930-B21, P03053-1A1, P03053-0A1, P14492-B21 and P19045-H21. It also runs at 2133, 2400 and 2666 MHz when the system bus requires a lower speed. The jump is worth it when expanding virtualization density or database buffers on supported Gen10 hardware.

Suits ProLiant Gen10 owners

This memory suits administrators extending BL460c, DL325, DL360, DL380 or DL385 Gen10 servers with validated ECC registered modules. It will not work in standard desktop computers and cannot be mixed with unbuffered or load-reduced DIMMs. Buyers needing unbuffered ECC or consumer DDR4 should look at something else.

Highlights

  • 64 GB capacity extends server memory headroom
  • DDR4 2933 MHz CL21 speed supports demanding workloads
  • ECC registered design detects and corrects data errors
  • 2 V operation lowers power draw per module
  • Compatible with HP ProLiant BL460c DL325 DL360 DL380 DL385 Gen10

Specifications

BrandOWC
Part Number2R9D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant BL460c Gen10
HP ProLiant DL325 Gen10
HP ProLiant DL360 Gen10
HP ProLiant DL380 Gen10
HP ProLiant DL385 Gen10

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 288-pin DDR4 ECC RDIMM fit the DIMM slots on an HP ProLiant DL380 Gen10?

Yes, the module is a 288-pin DDR4 ECC Registered DIMM designed for the listed ProLiant servers including the DL380 Gen10.

What is the correct way to seat this 64GB 2Rx4 module so the ECC registered buffer initialises properly?

Align the notch with the slot key, press firmly until both retention clips click, then verify the server POST reports 2933 MHz CL21 at 1.2 V.

When should this 1.2 V ECC registered DIMM be replaced if correctable error counts start rising in the iLO logs?

Replace the module once the platform firmware logs show a sustained increase in correctable ECC errors, indicating cell wear on the 2Rx4 DRAM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.