We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 204-pin 1.5V SODIMM memory upgrade for HP EliteOne 705 G1 705 G2 800 G1

SKU CH-8JWT-S0533

Adds 8 GB of DDR3 1600 CL11 SODIMM memory to compatible HP EliteOne all-in-ones

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boost system responsiveness with 8 GB DDR3 1600 memory
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Designed and tested to meet or exceed OEM specifications
  • 204-pin SODIMM fits HP EliteOne 705 G1, 705 G2 and 800 G1
  • Easy DIY installation with 1.5 V low-voltage operation

8GB DDR3 1600 SODIMM for HP EliteOne

This 8GB DDR3 1600 CL11 SODIMM module is built for HP EliteOne 705 G1, 705 G2 and 800 G1 all-in-one systems. It delivers a straightforward capacity increase for office workloads, web browsing and light multitasking on these specific platforms.

Check your EliteOne model and slot layout

Verify the exact model number on the back of your EliteOne unit matches 705 G1, 705 G2 or 800 G1 before ordering. Confirm the system uses 204-pin SODIMM slots and that an 8GB 2Rx8 unbuffered non-ECC module at 1.5V is supported by the installed BIOS revision.

Replaces lower-capacity DDR3 modules

Swapping a 4GB or 2GB DDR3 stick for this 8GB module doubles or quadruples the memory available to the operating system. The upgrade is most worthwhile when the system currently runs a single lower-capacity DIMM and the workload involves keeping several applications open simultaneously.

Highlights

  • Boost system responsiveness with 8 GB DDR3 1600 memory
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Designed and tested to meet or exceed OEM specifications
  • 204-pin SODIMM fits HP EliteOne 705 G1, 705 G2 and 800 G1
  • Easy DIY installation with 1.5 V low-voltage operation

Specifications

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP EliteOne 705 G1
HP EliteOne 705 G2
HP EliteOne 800 G1

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 204-pin SODIMM arrive as a single 8 GB module or do I need to buy a second stick?

The upgrade consists of one 8 GB DDR3 1600 CL11 2Rx8 1.5 V SODIMM; add a second module only if your EliteOne has a free slot and you want 16 GB total.

Should I choose the 2Rx8 rank or look for a single-rank alternative for my EliteOne 705 G2?

This module is 2Rx8; the EliteOne 705 G1, 705 G2 and 800 G1 all accept 2Rx8 DDR3 1600 SODIMMs, so the listed rank works without changes.

Will the CL11 1600 MHz rating deliver the full PC3-12800 bandwidth inside an EliteOne 800 G1?

The EliteOne 800 G1 runs DDR3 at 1600 MHz, so the module operates at its rated CL11 1600 speed and provides the full PC3-12800 transfer rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.