Partaker A13-PA-190TPC-CE5B(I34) 18.5" all-in-one PC i3-4th 8GB DDR3 128GB
- All-in-One
- Silver
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
partaker
A 17" IP65-rated industrial all-in-one with a fanless Celeron J1900, 8GB DDR3L, 128GB SSD, resistive touchscreen and multiple COM, USB and VGA ports
GPU Intel HD Graphics
Memory 8GB DDR3
HDD None
Struck-through versions exist but are not stocked here.
This 17 inch all-in-one computer combines an Intel Celeron J1900 processor with 8GB DDR3L memory and a 128GB mSATA SSD in a fanless aluminium chassis. The front panel meets IP65 protection for dust and water jets, making it suitable for factory floors, kiosks and outdoor cabinets. Windows 10 Pro is pre-installed for immediate deployment.
The sealed chassis uses passive cooling, eliminating moving parts that could fail in vibration-prone environments. Embedded buckle kits allow flush panel mounting into a 380 x 315 mm cut-out, while VESA 75 compatibility supports arm or wall brackets. Connectors include VGA, three COM ports, three USB 2.0, one USB 3.0, Gigabit LAN and audio jacks, all accessible from the rear.
The 1280 x 1024 TFT LED display is bonded to a resistive sensor rated for 200 million touches and specified for 0 to 50 °C operation with an SSD. Resistive technology works with gloves, stylus or wet fingers, unlike capacitive alternatives. Buyers needing multi-touch gestures or higher brightness for direct sunlight should evaluate other panels.
| Model | A9-PA-170TPC-CE5A(J19)-8G128G |
|---|---|
| Form Factor | All-in-One |
| Color | Silver |
| Operating System | Windows 10 Pro |
| CPU Type | Celeron |
| CPU Name | 2.00GHz |
| GPU/VGA Type | Intel HD Graphics |
| Memory Capacity | 8GB DDR3 |
| HDD | No |
| Screen Size | 17.0" |
| Touchscreen | Yes |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The VGA port drives an external display at up to 1280 x 1024 pixels, matching the native resolution of the built-in 17" TFT LED panel.
The mounting cut-out must measure 380 mm wide by 315 mm high to fit the 386.3 x 321.3 mm chassis with the supplied embedded buckle kits.
Remove the rear cover, insert the mSATA SSD into the full-size Mini PCIe slot at a 30° angle, press down and secure with the retention screw; the step most often missed is fastening that screw, leaving the drive unsecured.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?