EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
partaker
Fanless barebone mini PC with Intel Celeron 1037U, 8 GB DDR3, 128 GB SSD, 1 TB HDD and Windows 10 Pro
This Partaker barebone arrives with Windows 10 Pro already activated, an Intel Celeron 1037U dual-core processor at 1.80 GHz, 8 GB of DDR3 memory, a 128 GB mSATA SSD and a 1 TB 2.5-inch hard drive. It targets small offices, digital-signage players or home users who need a silent, low-power desktop that works straight from the box. Buyers who require a discrete graphics card or more than 8 GB of RAM should look elsewhere.
The aluminium chassis acts as a passive heatsink, keeping the system at 40 to 50 °C under typical load while producing zero fan noise. Manufacturer figures quote a maximum power consumption of 20 W and a theoretical peak of 15 W, with real-world use often below 9 W. The CPU carries a 17 W TDP that can be lowered to 7.5 W, making the unit suitable for always-on deployments where electricity cost and acoustic silence matter.
HDMI and VGA ports drive two independent displays and support 4K ultra-HD playback on the HDMI link. Inside, one mSATA slot and one 2.5-inch SATA bay allow the pre-installed SSD and hard drive to coexist or be swapped for different capacity mixes. The single 204-pin SO-DIMM socket is already populated to the 8 GB DDR3 maximum, so memory upgrades are not possible.
| Type | Business Desktops & Workstations |
|---|---|
| Color | Black |
| Monitor | Monitor not included |
| Operating System | Windows 10 Pro |
| CPU Type | Celeron |
| CPU Name | Intel Celeron 1037U |
| GPU/VGA Type | Intel HD Graphics |
| Memory Capacity | 8GB DDR3 |
| HDD | 1TB |
| Screen Size | No Screen |
Insert the mSATA SSD into the motherboard slot at a slight angle, press it flat and secure it with the retention screw; the step often missed is tightening that screw so the drive stays seated.
The single 204-pin SO-DIMM slot is already filled to the 8GB maximum, so any future upgrade requires replacing the module with another DDR3 SODIMM of the same voltage and speed.
The aluminium housing is designed to keep the internal temperature between 40 and 50 degrees Celsius during continuous operation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?