We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 120mm ARGB case fans with transparent blades and black frames, shown as a triple pack

PCCOOLER

PCCOOLER F3 S120 ARGB White 120mm Case Fans 3-Pack

SKU CH-Q001-8ER7M

Three white 120 mm case fans deliver 63.9 CFM airflow and 3.7 mmH₂O static pressure at up to 2200 RPM while running at 33 dB(A) with sealed hydraulic bearings and 5 V ARGB lighting

  • Fan Size120mm
  • LEDARGB
  • TypeCase Fan
  • Bearing TypeHydro Bearing
  • RPM500~2200RPM±10%
  • Air Flow63.9CFM

LED ARGB

Color White

  • Balanced cooling with 63.9 CFM airflow and 3.7 mmH2O pressure
  • 5V ARGB sync for custom lighting across motherboard ecosystems
  • Sealed hydraulic bearing cuts noise to 33 dB(A) and extends lifespan
  • PWM control from 500 to 2200 RPM for automatic speed adjustment
  • Daisy-chain PWM connectors simplify cabling for clean builds

Three-fan ARGB kit

This three-pack supplies three 120 mm white case fans with addressable RGB lighting. Each unit uses a 4-pin PWM connector and a sealed hydraulic bearing rated for long service life. The fans target builders who want coordinated lighting and simplified cabling in a single purchase.

PWM daisy-chain limits

The fans link through built-in male and female PWM connectors so one motherboard header can drive the chain. Speed range spans 500 to 2200 RPM with a ±10 % tolerance, and the 4-pin interface caps control granularity at the header's own resolution. Builders needing independent per-fan curves must connect each unit to its own header.

Airflow and noise headroom

Maximum output reaches 63.9 CFM and 3.7 mmH₂O static pressure at the top of the speed range. Acoustic load peaks at 33 dB(A) under full load, leaving headroom for quieter operation at lower RPM. Dense radiator stacks or heavily filtered intakes will push the fans toward their pressure ceiling.

Highlights

  • Balanced cooling with 63.9 CFM airflow and 3.7 mmH2O pressure
  • 5V ARGB sync for custom lighting across motherboard ecosystems
  • Sealed hydraulic bearing cuts noise to 33 dB(A) and extends lifespan
  • PWM control from 500 to 2200 RPM for automatic speed adjustment
  • Daisy-chain PWM connectors simplify cabling for clean builds

Specifications

BrandPCCOOLER
SeriesF3
ModelF3 S120 ARGB WH 3IN1
Part NumberF3S120-WHAC313-GL
Fan Size120mm
LEDARGB
TypeCase Fan
Bearing TypeHydro Bearing
RPM500~2200RPM±10%
Air Flow63.9CFM
Noise Level33dB(A)
Power Connector4-pin PWM
ColorWhite
CompatibilityCase
Fan Counts3 Fans
Fan Thickness25mm
Air Pressure3.7mmH2O
Dimensions120x120x25mm

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 3-fan pack or look for a single fan?

The 3-fan pack covers typical front-intake or top-exhaust layouts in one box, and the daisy-chain connectors let you run all three from a single motherboard header.

What does the 63.9 CFM airflow figure deliver in my case?

At 2200 RPM the fans move 63.9 CFM with 3.7 mmH2O static pressure, enough to push air through mesh panels or a CPU cooler while staying at 33 dB(A).

How does the 4-pin PWM connector limit speed control?

The 4-pin PWM link lets the motherboard vary speed from 500 to 2200 RPM, so the fans spin only as fast as the temperature curve demands.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.