We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Peladn RTX 3050 dual-fan graphics card black metal shroud PCIe bracket

Peladn

Peladn GeForce RTX 3050 6GB GDDR6 Dual-fan Edition graphics card

SKU CH-AMXV-C6DS0

Entry-level GPU with 6 GB GDDR6 memory on a 96-bit bus, dual-fan cooling and a 70 W TDP

  • InterfacePCI Express 4.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 30 Series
  • GPUGeForce RTX 3050
  • Core Clock1042 MHz
  • CUDA Cores2304
  • 6 GB GDDR6 memory enables smooth 1080p gaming
  • 2304 CUDA cores accelerate rendering and AI workloads
  • 70 W TDP keeps power draw low for compact builds
  • Dual-fan cooler maintains stable temperatures under load
  • PCI Express 4.0 x16 interface maximises bandwidth for modern motherboards

Peladn RTX 3050 6GB Dual-fan Graphics Card

This graphics card uses the NVIDIA GeForce RTX 3050 GPU with 2304 CUDA cores and a 1042 MHz core clock. It provides 6GB of GDDR6 memory across a 96-bit interface running at an effective 1470 MHz. The PCI Express 4.0 x16 connection and DirectX 12 support suit 1080p gaming and general creative workloads. A dual-fan cooler manages the 70W TDP within a 203 x 114 x 42 mm frame.

Entry 1080p Gamers and Compact Builds

The 70W power draw and 500W PSU recommendation make this card a fit for smaller cases and modest power supplies. Outputs include one HDMI, one DisplayPort and one DVI port for mixed monitor setups. Windows 7 through 10 64-bit are supported. Builders needing higher frame rates at 1440p or ray-tracing headroom should consider a higher-tier model with more memory bandwidth.

Standard PCIe Slot Installation

Mount the card in a PCI Express 4.0 x16 slot and connect a single 6-pin or 8-pin power cable from the PSU. The 203 mm length fits most mid-tower cases, but verify clearance against drive cages or motherboard headers. Driver installation on a fresh Windows 10 64-bit system is straightforward; the most common issue is forgetting the supplemental power connector, which prevents the card from posting.

Highlights

  • 6 GB GDDR6 memory enables smooth 1080p gaming
  • 2304 CUDA cores accelerate rendering and AI workloads
  • 70 W TDP keeps power draw low for compact builds
  • Dual-fan cooler maintains stable temperatures under load
  • PCI Express 4.0 x16 interface maximises bandwidth for modern motherboards

Specifications

BrandPELADN
InterfacePCI Express 4.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 30 Series
GPUGeForce RTX 3050
Core Clock1042 MHz
CUDA Cores2304
Effective Memory Clock1470
Memory Size6GB
Memory Interface96-Bit
Memory TypeGDDR6
DirectXDirectX 12
HDMI1 x HDMI
DisplayPort1 x DisplayPort
DVI1 x DVI
CoolerDouble Fans
Thermal Design Power70W
Recommended PSU Wattage500W

Questions about this item

Will the 203 mm length and dual-slot thickness fit my mid-tower case?

The card measures 203 mm long, 114 mm tall and 42 mm thick, so check your case clearance for length and two-slot width before ordering.

Does my power supply need a dedicated PCIe connector for this 70 W TDP card?

The board draws up to 70 W and the maker recommends a 500 W unit; most models take a single 8-pin connector, but confirm the exact plug on the card you receive.

Can I drive three monitors at once using the HDMI, DisplayPort and DVI outputs?

Yes, the rear bracket provides one HDMI, one DisplayPort and one DVI port, allowing up to three simultaneous displays.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.