We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular monocrystalline solar panel in an anodised aluminium frame, dark cells with MC4 connectors

PFCTART

PFCTART 600W Monocrystalline Solar Panel Kit 200W 12V

SKU CH-DNGJ-SJH6Y MPN 600W

Monocrystalline 200 W panel kit with half-cut cells, MC4 connectors, anodised frame rated for 2400 Pa wind and 5400 Pa snow, plus wiring for off-grid 12 V charging

  • TypeSolar Panel Kits
  • Cell TypeMonocrystalline
  • Solar Panel KitsOff-Grid
  • Kit AccessoriesWiring & Connector
  • Size/Dimensions49.60*29.92*1.18 Inch
  • FrameAnodized aluminum alloy
  • Reliable output with 200W NOCT maximum power
  • Half-cut cell design cuts loss and handles shade better
  • Anodised aluminium frame withstands 2400Pa wind and 5400Pa snow
  • MC4 connectors and junction box simplify off-grid setup
  • Monocrystalline cells deliver 90% power at 10 years and 80% at 20 years

200W Monocrystalline Off-Grid Kit

This 600W Monocrystalline Solar Panel Kit delivers 200W NOCT maximum power for off-grid battery charging. The package includes MC4 connectors and wiring so the panel can be connected to a charge controller straight away. It is built for RV, marine, cabin and home backup installations.

Suits 12V off-grid systems.

The 18V Vmp and 11.11A Imp match typical 12V PWM or MPPT controllers used in recreational vehicles, boats and remote cabins. Buyers needing grid-tied operation or a 24V and above battery bank should look at different equipment.

200W NOCT Pmax at 18V Vmp / 11.11A Imp

Under standard NOCT conditions the panel produces 200W at 18V and 11.11A, yielding roughly 800Wh per day with four hours of full sun. This single figure determines whether the kit meets the daily energy requirement of the intended 12V system.

Highlights

  • Reliable output with 200W NOCT maximum power
  • Half-cut cell design cuts loss and handles shade better
  • Anodised aluminium frame withstands 2400Pa wind and 5400Pa snow
  • MC4 connectors and junction box simplify off-grid setup
  • Monocrystalline cells deliver 90% power at 10 years and 80% at 20 years

Specifications

Model600W Monocrystalline Solar Panel
TypeSolar Panel Kits
Cell TypeMonocrystalline
Solar Panel KitsOff-Grid
Kit AccessoriesWiring & Connector
Size/Dimensions49.60*29.92*1.18 Inch
FrameAnodized aluminum alloy
ConnectorsMC4 Connectors
NOCT Maximum Power (Pmax)200W
NOCT Optimum Operating Voltage (Vmp)18V
NOCT Optimum Operating Current (Imp)11.11A
NOCT Open Circuit Voltage (Voc)21.6V
NOCT Short Circuit Current (Isc)12.2A
Selling UnitKit
SpecificationsAbrasion Resistant, Antimicrobial Resistant, Chemical Resistant, Corrosion Resistant, Dust Resistant, Dustproof
FeaturesWaterproof, All Daylight Conditions, Maintenance Free, Monocrystalline

Questions about this item

Does the half-cut cell design change what maintenance the 200W panel will need later?

The kit is described as maintenance free, so the half-cut cell design does not introduce any extra upkeep beyond occasional cleaning of the glass surface.

What output limit appears first when the 200W panel runs continuously in full sun?

The NOCT maximum power of 200W is the ceiling; the panel will not exceed 200W even under sustained peak irradiance.

How much heat or noise does the 200W panel produce during all-day operation?

The panel is silent and the half-cut cell technology lowers operating temperature, while the anodized aluminum frame dissipates heat without any moving parts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.