Phanteks PH-GO360M25G2_DWT02 liquid cooler
- Liquid Cooling Syst…
- Intel Socket LGA 11…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Phanteks
A 360 mm all-in-one cooler with three D30 PWM fans, a ceramic-bearing pump at 3100 RPM and an aluminium cover that directs airflow over VRM and M.2 areas
Fan Size 3 Fan Slots (360 mm)
Color Black
Option 360D30 X2
Struck-through versions exist but are not stocked here.
The Phanteks Glacier One 360D30 X2 is an all-in-one liquid CPU cooler built for gamers and PC enthusiasts running high-end processors. It mounts on Intel LGA 1851, 1700, 1200, 115x and AMD AM4, AM5 sockets. The design prioritises maximum clearance around motherboard and RAM components. Buyers who need a compact air cooler or a smaller radiator format should look elsewhere.
The pump runs at 3100 ± 10% RPM with a ceramic bearing and emits 20 dBA. Three 120 mm D30 fans operate between 250 and 2000 ± 10% RPM, each moving 64.3 CFM at 30.2 dBA via 4-pin PWM connectors. The Evolv X2 aluminium pump cover integrates a fan that directs airflow toward VRM and M.2 areas. No power-draw figures are provided.
The three D30 fans can interconnect into a single frame, reducing cable clutter during installation. The pump cover’s integrated fan actively cools surrounding VRM and M.2 SSD components without extra wiring. No software suite or lighting controller is mentioned in the specifications. Builders who expect bundled RGB software or additional mounting brackets will not find them here.
| Brand | Phanteks |
|---|---|
| Pump Speed | 3100 ± 10% RPM with 100% duty cycle |
| Pump Bearing | Ceramic bearing |
| Pump Noise | 20 dBA |
| Fan Size | 3 Fan Slots (120 mm) |
| Fan Dim. | 120 x 120 x 30mm |
| Fan RPM | 250 - 2000 ± 10% RPM |
| Fan Air Flow | 64.3 CFM |
| Fan Noise | 30.2 dBA |
| Fan Connector | 4-pin PWM |
| Color | Black |
| Shipping weight | 2.90 kg |
| Package size | 445 × 216 × 152 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Connect each 4-pin PWM fan to a motherboard fan header or hub, then plug the pump tach into the CPU_FAN header so the board sees 3100 RPM at 100% duty cycle; the common mistake is leaving the pump on a chassis header locked at a lower voltage.
The three D30 120 mm fans rated at 250-2000 RPM and the ceramic-bearing pump running at 3100 RPM are the moving components; fans typically wear before the sealed loop, so expect fan replacement after several years of continuous use.
The pump is fixed at 3100 RPM and the fans max out at 2000 RPM delivering 64.3 CFM each, so once coolant temperature stabilises the radiator surface area becomes the bottleneck before fan or pump speed can increase further.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?