We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular matte black ATX power supply, 15 by 16.5 by 8.5 cm, non modular cables visible, 165 mm fan grille on one side

Pstaroth

Pstaroth 2000W 8 GPU Mining Power Supply

SKU CH-HHB7-ZZS1P

Delivers 2000 W through 16 GPU connectors and 8 SATA ports with 90 % efficiency and automatic 110–240 V switching

  • TypeATX
  • Maximum Power2000 W
  • ModularNon-Modular
  • Dimensions15*16.5*8.5cm
  • Weight3kg
  • Package Content1x Power supply Interface: 3 x IDE 1 x 4+4 Pin 16 x 6+2 Pin
  • Powers up to eight graphics cards with a 2000 W maximum output
  • Delivers 90 % conversion efficiency for lower electricity draw
  • Auto-switches between 110 V and 220 V input without manual selection
  • Supplies sixteen 6+2-pin connectors for direct GPU power
  • Includes high-temperature protection that activates above 50 °C

2000W mining PSU with 16 GPU connectors

This ATX power supply delivers 2000W maximum output and carries 80 Plus Gold certification with a 90% conversion rate. It is built specifically for cryptocurrency mining rigs that run up to eight graphics cards from a single unit. The non-modular design keeps all cables permanently attached for a fixed wiring layout.

Suits miners running eight GPUs on 110V

Builders who need a single high-wattage unit for a dense GPU farm will match the 16 PCIe connectors and 8 SATA ports to their cards and risers. The automatic 100-120V and 200-240V input range covers both North American and international grids without a switch. Operators who prefer modular cabling for cleaner airflow or who run fewer than four cards should look at smaller, modular alternatives.

Fits standard ATX bays

The 15 by 16.5 by 8.5 cm enclosure slides into a regular ATX mounting area while the 165mm ball-bearing fan moves air across the pure-copper wiring. High-temperature protection triggers above 50 centigrade to shut the unit down before damage occurs. A dust cover shields the internals in harsh environments. The 20+4 pin, 4+4 pin, three IDE and eight SATA leads power the motherboard, CPU and storage without extra adapters.

Highlights

  • Powers up to eight graphics cards with a 2000 W maximum output
  • Delivers 90 % conversion efficiency for lower electricity draw
  • Auto-switches between 110 V and 220 V input without manual selection
  • Supplies sixteen 6+2-pin connectors for direct GPU power
  • Includes high-temperature protection that activates above 50 °C

Specifications

TypeATX
Maximum Power2000 W
ModularNon-Modular
Dimensions15*16.5*8.5cm
Weight3kg
Package Content1x Power supply Interface: 3 x IDE 1 x 4+4 Pin 16 x 6+2 Pin 8 x SATA 1 x 20+4 Pin
Input Voltage100 - 120 V/ 200 - 240 V

Questions about this item

What motherboard power connectors does the PSU include for the system board and CPU?

The unit supplies one 20+4 pin ATX connector and one 4+4 pin EPS connector for the motherboard and processor.

Will the 16 PCIe 6+2 pin outputs run cards like the 1060, 1070, 1080, 2070, 2080, 3070 and 3080 listed in the compatibility note?

Yes, the 16 PCIe 6+2 pin cables are designed to power those specific GPU models simultaneously.

How can I confirm the PSU is operating normally after installation?

The 165 mm fan should spin, the unit should stay below 50 °C, and all connected GPUs should receive stable power without triggering short-circuit or over-voltage protection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.