We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey ATX power supply unit with single fan and multiple connectors

Replace Power

Replace Power RPSU-C95-5 400W ATX power supply

SKU CH-NB8R-H9WKB MPN RPSU-C95-5

A 400 W ATX power supply with 20+4 pin, 4-pin 12 V, three SATA, two Molex and one floppy connector for HP Media Center m7767c and m8000f systems

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • Delivers 400 W to keep your system running
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • Includes three SATA 15-pin connectors for drives
  • Provides Molex and floppy power for legacy peripherals
  • High efficiency with low ripple and over-voltage protection

Replacement PSU for HP Media Center

This 400 watt ATX power supply replaces the original unit in HP Media Center m7767c and m8000f desktops. It provides a 20+4 pin motherboard connector, a P4 12V 4 pin connector, three SATA power connectors, two Molex connectors and one floppy connector for legacy drives.

Capacity and headroom for legacy builds

The 400 watt rating supports typical office workloads, integrated graphics and a modest complement of storage and optical drives. Heavy discrete graphics cards or multi-drive arrays will exceed the available headroom on the single 12 volt rail.

Thermals noise and power draw

A single internal fan cools the grey chassis measuring 5.8 by 3.37 inches. High efficiency and low ripple specifications keep waste heat and acoustic output low during normal desktop operation. Over voltage protection guards connected components.

Highlights

  • Delivers 400 W to keep your system running
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • Includes three SATA 15-pin connectors for drives
  • Provides Molex and floppy power for legacy peripherals
  • High efficiency with low ripple and over-voltage protection

Specifications

BrandReplace Power
ModelRPSU-C95-5
ColorGrey
TypeATX
Fans1
Weight0.1

Questions about this item

Will the 20+4 pin ATX and 4-pin P4 connectors on this 400W unit fit the motherboard in my older HP Media Center m7767c?

Yes, the 20+4 pin ATX connector works with both 20-pin and 24-pin motherboards, and the 4-pin P4-12V connector supplies CPU power for that platform.

How can I verify the RPSU-C95-5 is delivering stable power after installation?

The unit includes output over-voltage protection and low ripple and noise design; a multimeter on the 12 V rail should read close to 12 V under load.

Which cables come attached to the Replace Power RPSU-C95-5 and what might I need to add?

Fixed cables include one 20+4 pin ATX, one 4-pin P4, three SATA 15-pin, two Molex 4-pin and one floppy 4-pin; any extra SATA or Molex devices need adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.