We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 RDIMM modules in a row

RIMLANCE

RIMLANCE 96GB (6x16GB) DDR4 3200MHz ECC Registered RDIMM Server Memory Kit

SKU CH-13BS-5RBBV

Sixteen-gigabyte registered ECC DDR4 modules running at 3200 MHz with CL22 latency, supplied as a six-piece 96 GB kit for Dell PowerEdge XR11 servers

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Capacity 96GB (6 x 16GB)

Show 3 more configurations

Rank 2Rx8

  • 96GB capacity across six 16GB modules for large workloads
  • DDR4 3200MHz speed with CL22 latency for fast data transfer
  • ECC registered RDIMM design ensures data integrity in servers
  • 20V operation reduces power draw in dense configurations
  • Major OEM DRAM chips from Samsung Micron Hynix for reliability

96GB DDR4 ECC RDIMM Kit

This 96GB kit contains six 16GB DDR4 3200MHz ECC Registered DIMMs built for Dell PowerEdge XR11 rack servers. It targets administrators who need maximum registered capacity in a single validated kit for virtualization, databases or cloud workloads.

Upgrade from smaller RDIMM sets

Replacing partial-population kits or lower-density modules with this fully populated 6x16GB configuration raises total memory to 96GB and keeps all slots matched at CL22 1.20V. The jump is worth it when workloads exceed the capacity of half-filled channels and require registered ECC stability.

DDR4 3200 registered limits

The DDR4 3200 registered interface caps transfer rates at PC4-25600 and requires a memory controller that supports 2Rx8 registered modules at 1.20V. Systems limited to lower speeds, unbuffered DIMMs or fewer than six slots cannot use this kit at its rated specification.

Highlights

  • 96GB capacity across six 16GB modules for large workloads
  • DDR4 3200MHz speed with CL22 latency for fast data transfer
  • ECC registered RDIMM design ensures data integrity in servers
  • 20V operation reduces power draw in dense configurations
  • Major OEM DRAM chips from Samsung Micron Hynix for reliability

Specifications

BrandRIMLANCE
SeriesDell PowerEdge XR11 Rack Server Series Server Memory Module
ModelDell PowerEdge Compatible DDR4 3200MHz ECC RDIMM
Part NumberRRD25600D8C6K96
Capacity96GB (6 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix Chipset
Heat SpreaderNo
FeaturesCompatible and Optimized for Dell PowerEdge XR11

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 288-pin DDR4 RDIMM modules fit the memory slots in a Dell PowerEdge XR11 rack server?

Yes. The kit uses the standard 288-pin DDR4 RDIMM form factor that matches the XR11 DIMM slots, and the registered design is required for that platform.

What is the correct installation sequence for the six 16 GB modules across the XR11 memory channels?

Populate the slots following the channel order shown in the XR11 service manual — typically one module per channel first, then the second rank per channel — to enable full multi-channel bandwidth.

How can I tell when one of the 2Rx8 modules should be replaced after extended server use?

Watch for corrected ECC error counts rising in the system logs or BMC alerts; a sustained increase signals a module that should be swapped before it causes an uncorrectable failure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.