BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214.99
0.00277478BTC
In stock
RIMLANCE
RIMLANCE RSO21300D8C2K32-1 32GB (2×16GB) DDR4 2666MHz CL19 1.2V SODIMM laptop RAM
A 32 GB dual-channel DDR4 SODIMM kit running at 2666 MHz with CL19 latency and 1.2 V operation for laptop upgrades
- Capacity32GB (2 x 16GB)
- Type260-Pin DDR4 SO-DIMM
- CAS LatencyCL19
- ECCNo
- Buffered/RegisteredUnbuffered
- 32 GB kit handles heavy multitasking with 2×16 GB modules
- 2666 MHz DDR4 speed moves data at PC4-21300 rates
- Low 1.2 V operation extends battery life and runs cooler
- CL19 latency keeps response tight under load
- 260-pin SODIMM form factor fits standard laptop slots
32GB DDR4 SODIMM kit
This RIMLANCE kit provides 32GB of DDR4 laptop memory as two 16GB modules. It uses the 260-pin SO-DIMM form factor and runs at 2666MHz with a CAS latency of CL19. The modules operate at 1.2V and are unbuffered non-ECC.
Suits DDR4 laptops needing 32GB
This kit suits laptops that accept 260-pin DDR4 SO-DIMMs and can use a 32GB two-module configuration. Builders whose machines have only one memory slot or a lower maximum capacity should look elsewhere. Systems requiring ECC or registered memory cannot use these unbuffered non-ECC modules.
2666MHz CL19 speed grade
The decisive specification is the 2666MHz PC4-21300 data rate with CL19 latency. Your laptop must support DDR4 at this speed and timing for the memory to function correctly. If the platform requires a different DDR generation or a higher speed grade, this kit will not be compatible.
Highlights
- 32 GB kit handles heavy multitasking with 2×16 GB modules
- 2666 MHz DDR4 speed moves data at PC4-21300 rates
- Low 1.2 V operation extends battery life and runs cooler
- CL19 latency keeps response tight under load
- 260-pin SODIMM form factor fits standard laptop slots
Specifications
| Brand | RIMLANCE |
|---|---|
| Model | RSO21300D8C2K32-1 |
| Capacity | 32GB (2 x 16GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| CAS Latency | CL19 |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
Will the 260-pin DDR4 SODIMM modules fit my laptop's memory slots?
The kit uses the standard 260-pin DDR4 SODIMM form factor, which matches most modern laptop memory slots.
What is the correct way to seat the 2RX8 modules so they lock in place?
Insert each stick at a slight angle until the gold contacts disappear, then press down firmly until both side clips click.
How do I know when the 32 GB kit should be replaced or upgraded?
Replace if the system fails memory diagnostics, shows repeated crashes, or if workloads exceed the 32 GB capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
