Rosewill VNG650 650W 80+ Gold ATX 3.1 Non-Modular Power Supply
- ATX 3.1 Compatible
- 650 W
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Rosewill
A 750W ATX 3.1 power supply with full modular cabling, 80 PLUS Gold efficiency and a native 12V-2x6 connector for PCIe 5.1 graphics cards
Options ATX 3.1 80+ Gold (750W)
Struck-through versions exist but are not stocked here.
The Rosewill VMG750 is a fully modular power supply rated at 750 W and certified to the ATX 3.1 standard with 80 PLUS Gold efficiency. It targets builders who need a compact, high-efficiency unit for modern GPU architectures.
A 140 mm chassis depth reduces the footprint by roughly 35 percent compared with traditional units, leaving more room for cable routing in small-form-factor cases. Full modularity lets you connect only the 20+4-pin main, two 4+4-pin EPS, three 6+2-pin PCIe, one 12+4-pin 12V-2x6, eight SATA and four peripheral cables your build actually requires.
The single +12 V rail is specified for up to 235 percent power excursion and 300 percent GPU excursion, allowing the 12 V-2x6 connector to deliver 600 W continuously to a Gen 5 graphics card. A 120 mm FDB fan and large steel vents maintain airflow during extended loads while the six-protection suite guards against over-current, over-power, over-temperature, over-voltage, short-circuit and under-voltage events.
| Brand | Rosewill |
|---|---|
| Model | VMG750 |
| Type | ATX 3.1 Compatible |
| Maximum Power | 750 W |
| Fans | 1 x 120mm FDBfan |
| PFC | Active |
| Main Connector | 20+4Pin |
| +12V Rails | Single |
| SATA Power Connector | 6 |
| CrossFire | CrossFire Ready |
| Max PSU Length | 140 mm |
| Modular | Full Modular |
| Hold-up Time | 16ms min. |
| Efficiency | Up to 85% |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Output | +3.3V@18A, +5V@18A, [email protected] , [email protected] , +5VSB@3A |
| Connectors | 1 x 20+4-Pin Main Connector 2 x 4+4-Pin ATX12V / EPS12V Connector 3 x 6+2-Pin PCI-E Connector 1 x 12+4-Pin 12V-2x6 Connector 8 x 15-Pin SATA Connector 4 x 4-Pin Peripheral Connector |
| Shipping weight | 2.36 kg |
| Package size | 273 × 203 × 114 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 16 ms hold-up time is the minimum duration the PSU maintains regulation after AC loss, not a sustained-load limit; the unit is rated for continuous 750 W delivery.
The 120 mm FDB fan runs silently under typical loads; the steel shell with large vents and optimized thermal control keeps temperatures low during extended use.
All required cables — including the native 12+4-pin 12V-2x6 and three 6+2-pin PCIe cables — are included in the full-modular package.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?