ARCTIC COOLING ACTCP00007B MX-4 2019 Edition thermal paste 2.0g
- 2.0g
- 8.5 W/mK
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
SAMA
Single-tower air cooler with 100 mm ARGB PWM fan, four 6 mm copper heat pipes, 200 W TDP rating and 133.5 mm height for broad Intel and AMD socket compatibility
The SAMA X40L is a single-tower air cooler that uses four 6 mm copper heat pipes in direct contact with the CPU. A 100 mm hydro-bearing fan spins between 1000 and 2600 RPM and connects via a 4-pin PWM header for automatic speed control. The matte top cover integrates ARGB lighting that synchronises with compatible motherboards. It supports Intel LGA 1150, 1151, 1155, 1156, 1200, 1700 and 1851 sockets as well as AMD AM4 and AM5 platforms.
The cooler stands 133.5 mm tall, so it fits many mid-tower cases. Memory modules up to 45 mm high install without interference from the heatsink. The 200 W TDP rating covers most mainstream processors. Builders using compact ITX cases with tighter height limits or running sustained workloads above 200 W should consider larger coolers.
This figure is the primary guide for deciding whether the X40L matches a specific CPU. If the processor's rated heat output exceeds 200 W the cooler may not maintain acceptable temperatures under load. For CPUs at or below 200 W the four heat pipes and 56.6 CFM airflow provide adequate cooling with a noise level of 31.2 dBA at full speed.
| Brand | SAMA |
|---|---|
| Model | X40L |
| Color | Silver |
| Type | Fan & Heatsinks |
| Fan Size | 100mm |
| CPU Socket Compatibility | AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700 / Intel LGA 1851 |
| Bearing Type | Hydro |
| TDP | 200W |
| RPM | 1000~2600+/-10% RPM |
| Air Flow | 56.6 CFM |
| Noise Level | 31.2 dBA |
| Power Connector | 4-Pin PWM |
| Pressure | 3.25 mmH2O |
| LED | ARGB |
| Fan Mounting Types to Heatsink | Vertical |
| Max CPU Cooler Height | 133.5 mm |
| Fan Dimensions | 100 x 100 x 25mm |
| Shipping weight | 0.59 kg |
| Package size | 191 × 140 × 102 mm |
Yes, the fan uses a 4-pin PWM connector so the motherboard must provide that header for speed control.
The cooler stands about 92 mm tall and allows up to 45 mm memory height, so most standard and many performance DIMMs will clear without interference.
Connect the ARGB cable to a 5 V addressable header, then use the motherboard vendor software; the top-cover light strips should respond to colour and effect changes in real time.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?