We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SAMSUNG

SAMSUNG M378T5663EH3-CF7 8GB 4x2GB DDR2 800 CL6 desktop RAM

SKU CH-A433-4P2HE MPN M378T5663EH3-CF7

A 240-pin DDR2 desktop memory kit providing 8 GB across four 2 GB modules at 800 MHz with CL6 latency and 1.8 V operation

  • Ready for legacy DDR2 builds with 8 GB total capacity
  • Four 2 GB modules fill four slots for full channel population
  • 240-pin DDR2 SDRAM design matches older desktop motherboards
  • Runs at DDR2 800 (PC2-6400U) speed for period-correct performance
  • CL6 latency and 1.8 V operation suit unbuffered non-ECC systems

Kit Configuration

This Samsung desktop memory kit provides 8 GB total capacity organised as four 2 GB modules. It is intended for systems that use 240-pin DDR2 slots and need the full complement of populated channels. Buyers whose boards only accept two modules or require higher density per slot should look elsewhere.

Speed Rating

The modules run at DDR2 800 with a PC2-6400U designation and a CAS latency of 6. This specific speed grade is the single specification that determines whether the kit matches the motherboard's supported memory standard.

Sustained Operation

Rated voltage is 1.8 V and the modules are unbuffered non-ECC. Under continuous load the kit operates within standard DDR2 thermal limits without registered buffering or error correction overhead.

Highlights

  • Ready for legacy DDR2 builds with 8 GB total capacity
  • Four 2 GB modules fill four slots for full channel population
  • 240-pin DDR2 SDRAM design matches older desktop motherboards
  • Runs at DDR2 800 (PC2-6400U) speed for period-correct performance
  • CL6 latency and 1.8 V operation suit unbuffered non-ECC systems

Specifications

No published specifications for this item yet.

Questions about this item

what does the 800 mhz speed mean once it is installed?

the modules run at ddr2 800 with a cas latency of 6, delivering the standard pc2-6400u data rate for desktop systems

what does the pc2-6400u label cap in practice?

the pc2-6400u designation sets the maximum transfer rate at 6400 mb/s per module under jedec timings

what does the 240-pin ddr2 form factor need to fit?

each 2gb stick uses the standard 240-pin ddr2 layout and requires a desktop motherboard slot keyed for unbuffered non-ecc memory at 1.8v

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.