SAMSUNG
SAMSUNG MEM-DR380L-SL03-ER16 8GB DDR3 1600 2Rx8 ECC REG server RAM
8GB DDR3 1600 registered ECC module with 2Rx8 organisation for server use
- Capacity8GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- Voltage1.50V
- ECCYes
- Buffered/RegisteredRegistered
- 8 GB capacity supports demanding server workloads
- DDR3 1600 speed delivers 12800 MT/s data rate
- ECC registered design protects data integrity
- 2Rx8 dual-rank organisation increases memory density
- Supermicro certified for validated compatibility
8 GB DDR3-1600 ECC registered DIMM
This 8 GB Samsung module runs at DDR3-1600 (PC3-12800) with 1.50 V, ECC and registered buffering. The 2Rx8 organisation and 240-pin form factor suit server and workstation boards that require registered memory. It is Supermicro certified and RoHS compliant.
Suits servers needing registered ECC DDR3
Administrators upgrading or repairing Supermicro platforms that specify DDR3-1600 registered ECC DIMMs can use this module. Builders whose boards only accept unbuffered non-ECC memory or a different DDR generation should select a different part.
Registered buffering decides compatibility
The registered design adds a buffer between the memory chips and the memory controller, so the module only works in slots wired for registered DIMMs. Unbuffered slots will not recognise it.
Highlights
- 8 GB capacity supports demanding server workloads
- DDR3 1600 speed delivers 12800 MT/s data rate
- ECC registered design protects data integrity
- 2Rx8 dual-rank organisation increases memory density
- Supermicro certified for validated compatibility
Specifications
| Capacity | 8GB |
|---|---|
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
Questions about this item
Does the 240-pin DDR3 module fit a standard registered DIMM slot?
Yes, it is a 240-pin DDR3 registered DIMM that installs in any server board slot wired for DDR3 registered memory.
What is the correct way to seat the module so the register engages?
Align the notch with the slot key, press straight down until both ejector clips click, and verify the register LEDs show no fault.
When should the 8 GB 2Rx8 ECC REG stick be replaced?
Replace it if the system logs uncorrectable ECC errors, the module fails POST memory training, or the server vendor flags it in health monitoring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



