We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A silver 2.5 inch U.2 enterprise SSD with 15 mm thickness

Seagate

Seagate Nytro 5350 XP3840SE70035 3.84TB enterprise SSD

SKU CH-8B6S-6MCCZ MPN XP3840SE70035

Enterprise NVMe SSD delivering 3.84 TB capacity with 7.4 GB/s sequential read and 1.7 M IOPS for read-intensive workloads

  • Device TypeSSD
  • Used ForEnterprise
  • Form Factor2.5"
  • Capacity3.84TB
  • Memory Components3D NAND TLC
  • InterfacePCI-Express 4.0 x4
  • Delivers 7.4 GB/s sequential read for rapid data access
  • Achieves 1.7M IOPS to eliminate storage bottlenecks
  • Uses PCIe 4.0 x4 NVMe for high-bandwidth enterprise workloads
  • Provides 3.84 TB capacity in a 2.5-inch U.2 form factor
  • Built with 3D NAND TLC for read-intensive endurance

Enterprise 3.84 TB NVMe SSD

The Seagate Nytro 5350 is a 3.84 TB enterprise solid-state drive built for read-intensive server workloads. It uses a U.2 15 mm form factor with a PCIe 4.0 x4 interface and NVMe protocol. The drive targets data-centre operators who need high throughput in dense rack environments.

Capacity and throughput headroom

Sequential reads reach 7400 MBps while writes peak at 3400 MBps, and random performance scales to 1.7M IOPS. This bandwidth removes bottlenecks for analytics and content-delivery tasks. Write-heavy or mixed workloads will exhaust the endurance budget faster than read-dominant profiles.

Dual-port U.2/U.3 and 3D NAND TLC

Dual active-active ports enable high-availability configurations without extra hardware. The 3D NAND TLC memory supports the quoted throughput and density in a 2.5 inch package. No bundled software or accessories are mentioned in the specification.

Highlights

  • Delivers 7.4 GB/s sequential read for rapid data access
  • Achieves 1.7M IOPS to eliminate storage bottlenecks
  • Uses PCIe 4.0 x4 NVMe for high-bandwidth enterprise workloads
  • Provides 3.84 TB capacity in a 2.5-inch U.2 form factor
  • Built with 3D NAND TLC for read-intensive endurance

Specifications

BrandSeagate
SeriesNytro 5350
Device TypeSSD
Used ForEnterprise
Form Factor2.5"
Capacity3.84TB
Memory Components3D NAND TLC
InterfacePCI-Express 4.0 x4
ProtocolNVMe
Max Sequential ReadUp to 7400 MBps
Max Sequential WriteUp to 3400 MBps
Shipping weight0.17 kg
Package size229 × 152 × 76 mm

Questions about this item

Will the 2.5-inch U.2 form factor and PCIe 4.0 x4 interface fit my existing server backplane and CPU lanes?

The drive uses a 2.5-inch, 15 mm U.2 connector with PCI-Express 4.0 x4 lanes, so it fits standard U.2/U.3 hot-swap bays and negotiates Gen4 speeds with compatible CPUs and chipsets.

How can I verify the Nytro 5350 is delivering its rated 7400 MBps read and 1.7M IOPS after installation?

Use an NVMe-capable tool such as fio or nvme-cli to run a sequential read test and a random 4K read test on the namespace; results should approach 7400 MBps and 1.7M IOPS respectively.

Does the XP3840SE70035 ship with a heatsink, mounting screws or power cables, or must I source them separately?

The enterprise SSD is supplied as the bare drive only; any 2.5-inch carrier, heatsink, screws or cabling required by your chassis must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.