We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminum single-bay M.2 SSD enclosure with vertical inline design

Shenzhen Blueendless Electronics Co.,Ltd

Shenzhen Blueendless Electronics Co.,Ltd Dual Protocol M.2 SSD Enclosure USB 3.1 NVME+NGFF Aluminum 2TB 9210B

SKU CH-HDA2-W30HB

Aluminium M.2 enclosure supports NVME and SATA drives up to 2TB with USB 3.1 Gen 2 speeds of 900+ MB/s

  • ColorBlack
  • TypeDock
  • MaterialAluminum
  • Internal InterfaceSATA III
  • External InterfaceSATA
  • HDD Count SupportedSingle SSD
  • Supports both NVME and SATA M.2 drives for flexible storage upgrades
  • USB 3.1 Gen 2 interface enables transfer speeds up to 900+MB/s with NVME drives
  • RTL9210B controller provides reliable dual-protocol operation with UASP and TRIM support
  • Aluminium alloy construction with vertical design ensures efficient heat dissipation during operation
  • Accommodates four M.2 form factors including 2230, 2242, 260 and 2280 lengths

Dual-Protocol M.2 SSD Enclosure

The Shenzhen Blueendless enclosure accepts one M.2 drive and connects it to a host via USB 3.1 Gen 2. It supports both NVMe and SATA protocols on M-key or B+M-key modules in 2230, 2242, 260 and 2280 lengths. The aluminium shell acts as a heatsink and the RTL9210B controller handles UASP and TRIM for lower CPU overhead.

Suits users adding a single M.2 drive to a USB port

Builders who want tool-free access to one NVMe or SATA M.2 module will find the vertical layout convenient for heat dissipation. Not for users who need multiple simultaneous bays, hardware RAID modes, or an internal SATA connection instead of USB.

Maximum capacity per bay is 2 TB

The enclosure is rated for drives up to 2 TB, so larger modules are not supported. Transfer rates reach 900 MB/s with NVMe media and 440 MB/s with SATA media over the USB 3.1 Gen 2 link.

Highlights

  • Supports both NVME and SATA M.2 drives for flexible storage upgrades
  • USB 3.1 Gen 2 interface enables transfer speeds up to 900+MB/s with NVME drives
  • RTL9210B controller provides reliable dual-protocol operation with UASP and TRIM support
  • Aluminium alloy construction with vertical design ensures efficient heat dissipation during operation
  • Accommodates four M.2 form factors including 2230, 2242, 260 and 2280 lengths

Specifications

ColorBlack
TypeDock
MaterialAluminum
Internal InterfaceSATA III
External InterfaceSATA
HDD Count SupportedSingle SSD
Number of Bay1
Maximum Capacity (per Bay)Up to 2TB

Questions about this item

Does the enclosure need an M.2 drive with B+M or M key to operate?

Yes, the enclosure accepts M.2 SATA drives with B+M key and M.2 NVME drives with M key or B+M key in sizes 2230, 2242, 260 or 2280.

Will a legacy SATA M.2 drive still reach its full speed when used in this USB 3.1 Gen 2 enclosure?

A SATA protocol drive delivers up to 440 MB/s through the USB 3.1 Gen 2 link, which is the drive's native ceiling.

How can I verify the RTL9210B controller is running with UASP and TRIM enabled after setup?

In the OS device manager or with a tool such as CrystalDiskInfo, confirm the drive reports UASP active and TRIM supported for the attached SSD.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.