We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silverstone mini-ITX case with four tinted tempered glass panels and two 120mm fans

Silverstone Technology

Silverstone Technology RNAB08DF3WF4H PC case

SKU CH-TB7B-CNRB7 MPN RNAB08DF3WF4H

Mini-ITX chassis with four tempered-glass panels, two pre-installed 120 mm fans and a left-side air cutout for GPU cooling

  • TypeATX Mid Tower
  • Front Ports1 x USB 3.0 Type-C, 1 x USB 3.0, 2 x Audio
  • Tinted tempered glass panels give a clean, expressive look
  • Air inlet cutout on the left glass panel improves GPU cooling
  • 90 degree motherboard rotation creates a stack-effect airflow path
  • Tool-less buckles allow fast panel removal without exposed screws
  • Supports Mini-ITX and Mini-DTX boards with SFX or SFX-L power supplies

Compact Build Platform

This Silverstone Technology case is a small form factor chassis designed for Mini-DTX and Mini-ITX motherboards. It targets builders who want a compact footprint without sacrificing support for full-size graphics cards and CPU coolers. The SFX and SFX-L power supply compatibility keeps the internal layout flexible for high-performance components.

Airflow And Access Upgrades

The airflow version adds an air inlet cutout on the left tempered glass panel to feed cool air directly to the graphics card. Two pre-installed 120mm fans and support for up to two 120mm radiators establish a strong thermal baseline. A 90 degree motherboard rotation creates a natural stack effect that moves heat upward through the chassis. Tool-less buckles on the front and side panels make internal access quick and screw-free.

Straightforward Assembly With Clear Limits

Installation is simplified by the tool-less panel removal and the generous interior volume noted by the manufacturer. The rotated layout requires planning cable routes around the 90 degree motherboard orientation. Builders who need more than two 120mm radiator mounts or who require extensive 3.5 inch drive arrays should consider a larger chassis. The four tempered glass panels arrive pre-installed and require careful handling during the build.

Highlights

  • Tinted tempered glass panels give a clean, expressive look
  • Air inlet cutout on the left glass panel improves GPU cooling
  • 90 degree motherboard rotation creates a stack-effect airflow path
  • Tool-less buckles allow fast panel removal without exposed screws
  • Supports Mini-ITX and Mini-DTX boards with SFX or SFX-L power supplies

Specifications

TypeATX Mid Tower
Front Ports1 x USB 3.0 Type-C, 1 x USB 3.0, 2 x Audio
Shipping weight6.35 kg
Package size498 × 368 × 315 mm

Questions about this item

Will the two pre-installed 120mm fans need replacing, and how many more can I add?

The case ships with two 120mm fans installed. It supports up to two 120mm radiators, so additional 120mm fans can be fitted in those positions if you want more airflow or need to replace a worn unit.

What is the first thermal limit reached when the system runs flat out all day?

The stack-effect layout pulls cool air from the bottom and exhausts it through the top and the left glass cutout. The GPU temperature will typically hit its throttle point before the CPU because the graphics card sits directly in that rising airflow path.

How loud and hot does the case get with both 120mm fans spinning continuously?

Two 120mm fans running at moderate speed keep noise low while moving enough air for the stack-effect cooling. The tempered glass panels stay warm to the touch but not hot, and the open cutouts prevent heat build-up inside.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.