Simmtec, Inc
Simmtec, Inc 1GB DDR2 PC2 5300 667MHz 240 Pin DIMM desktop RAM
1GB DDR2 desktop module rated PC2-5300 at 667MHz with 240-pin DIMM fit
- Capacity1GB
- 1 GB capacity for basic desktop tasks
- DDR2 PC2 5300 standard for compatible systems
- 667 MHz clock speed for stable operation
- 240 pin DIMM form factor fits standard desktop slots
- Tested modules reduce risk of crashes and errors
1GB DDR2 desktop memory
This 1GB DDR2 module is intended for older desktop systems that still use 240-pin DIMM slots. It provides a basic capacity upgrade for everyday office tasks or legacy software environments. The PC2 5300 rating confirms a 667MHz operating speed for compatible platforms.
Low-power legacy operation
DDR2 technology generally draws less power than earlier DDR designs while running at modest clock rates. At 667MHz the module produces minimal heat, so standard case airflow is usually sufficient without extra cooling. Quiet operation suits noise-sensitive workspaces.
Simple 240-pin installation
The 240-pin DIMM form factor fits directly into matching desktop motherboard slots with no adapters required. Adding this single module leaves remaining slots free for future expansion if the board supports more memory. Compatibility depends on the motherboard accepting DDR2 PC2 5300 specifications.
Highlights
- 1 GB capacity for basic desktop tasks
- DDR2 PC2 5300 standard for compatible systems
- 667 MHz clock speed for stable operation
- 240 pin DIMM form factor fits standard desktop slots
- Tested modules reduce risk of crashes and errors
Specifications
| Capacity | 1GB |
|---|
Questions about this item
How do I install the 240 pin DIMM and what step often goes wrong?
Align the notch on the module with the slot key, press down firmly until both side clips snap shut, and verify the clips are fully latched — the most common error is stopping when the module feels seated but before the clips click.
What maintenance or replacement will the DDR2 module need later?
No routine maintenance is required; if errors appear, clean the gold contacts with a lint-free cloth and reseat the module, otherwise it runs until a failure or a system upgrade replaces it.
What limit appears first under sustained use at 667 MHz?
The DDR2 PC2 5300 rating sets the maximum stable data rate, so prolonged heavy workloads will hit that bandwidth ceiling before any thermal or voltage limit becomes an issue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



