We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR2 DIMMs with gold contacts and silver heat spreaders

Simmtec, Inc

Simmtec, Inc DDR2 8GB Kit (4x2GB) 800MHz CL6 1.8V 240-Pin Desktop RAM

SKU CH-WAMV-R1S6F

An 8GB DDR2 kit of four 2GB modules running at 800MHz with CL6 latency and 1.8V on 240-pin DIMMs

  • Capacity8GB (4 x 2GB)
  • CAS LatencyCL6
  • 8GB total capacity across four modules for multitasking headroom
  • DDR2-800MHz speed keeps data flowing to the processor
  • CL6 CAS latency reduces access delay per cycle
  • 8V operating voltage matches standard desktop DDR2 specs
  • 240-pin DIMM form factor fits compatible desktop motherboards

Kit composition and target system

This Simmtec kit supplies 8 GB of DDR2 memory across four 2 GB modules. It is intended for desktop computers that accept 240-pin DIMMs and run at 800 MHz with a CAS latency of CL6.

Included modules and tested behaviour

The package contains four unbuffered DIMMs rated at 1.8 V and specified as PC2-6400. Each module is dual-rank 2Rx8 and has been functionally tested before shipment to confirm basic operation.

Build and daily installation notes

Gold-finger contacts may need a light wipe with an eraser if the system does not recognise the memory at first boot. The 240-pin layout fits standard DDR2 desktop slots, and the 1.8 V rating matches the voltage used by typical DDR2 platforms.

Highlights

  • 8GB total capacity across four modules for multitasking headroom
  • DDR2-800MHz speed keeps data flowing to the processor
  • CL6 CAS latency reduces access delay per cycle
  • 8V operating voltage matches standard desktop DDR2 specs
  • 240-pin DIMM form factor fits compatible desktop motherboards

Specifications

Capacity8GB (4 x 2GB)
CAS LatencyCL6

Questions about this item

Will the 240-pin DDR2 modules need any cleaning or replacement after long-term use?

The gold fingers can be gently wiped with an eraser if contact issues appear, otherwise no scheduled maintenance is required.

What limit appears first when the CL6 800MHz kit runs continuously at full load?

The DDR2-800 1.8V specification sets the maximum stable data rate, so sustained throughput cannot exceed the rated 800MHz speed.

How much heat and power does the 4x2GB 1.8V kit produce during all-day operation?

Each module runs at the standard 1.8V DDR2 voltage, so total power draw and heat stay within the normal range for PC2-6400 DIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.