BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214.99
0.00277962BTC
In stock
SK hynix
SK hynix HMA82GS6CJR8N-XN 16GB DDR4 3200 CL22 SODIMM laptop RAM
16 GB DDR4 SODIMM runs at 3200 MHz with CL22 latency and 1.2 V operation
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
Capacity 16GB
- 32GB (2 x 16GB)
- 16GB
Struck-through versions exist but are not stocked here.
- 16 GB DDR4 capacity for responsive multitasking
- 3200 MHz speed moves data quickly
- CL22 latency keeps timing tight
- 2 V operation reduces power draw
- 260-pin SODIMM fits standard laptop slots
16 GB DDR4 3200 laptop memory
This 16 GB DDR4 3200 SODIMM upgrades a laptop that accepts 260-pin unbuffered modules. It runs at 1.20 V with a CAS latency of CL22. The kit is built for dual-channel operation. Buyers who want more storage or a different DDR generation cannot use this module.
Dual-channel kit for balanced throughput
Two matched sticks enable dual-channel mode on platforms that support it, doubling the memory bus width compared with a single module. The CL22 timing and 3200 MT/s rating are factory-set; no extra software or configuration utility is bundled. Systems limited to single-channel architecture will not gain the bandwidth benefit.
Standard 260-pin SO-DIMM build
The module uses the industry-standard 260-pin SO-DIMM form factor and operates at the JEDEC 1.20 V level, so it fits the same slots as other DDR4 laptop memory. Gold-edge contacts resist oxidation during repeated upgrades. Builders who need ECC or registered DIMMs must choose a different product.
Highlights
- 16 GB DDR4 capacity for responsive multitasking
- 3200 MHz speed moves data quickly
- CL22 latency keeps timing tight
- 2 V operation reduces power draw
- 260-pin SODIMM fits standard laptop slots
Specifications
| Brand | Hynix |
|---|---|
| Model | HMA82GS6CJR8N-XN |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
Questions about this item
Will the 260-pin DDR4 SODIMM need any firmware updates or periodic reseating after installation?
No firmware updates are required for this DDR4 module, and reseating is only necessary if the laptop is moved frequently or shows memory errors.
What limit appears first when the 16 GB CL22 kit runs at 3200 MT/s under continuous load?
The CL22 latency at 1.20 V is the primary constraint; sustained throughput is capped by the rated 3200 MT/s speed.
How much heat and power does the 1.20 V dual-rank module produce during all-day operation?
At 1.20 V the module draws minimal power and generates low heat, typical for standard DDR4 SODIMMs under constant use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
