We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SMUGDESK

SMUGDESK 4 Port PCIe to SATA 6Gbps Expansion Card

SKU CH-G41M-JYREG

Adds four SATA III ports at 6Gbps for 2.5" and 3.5" drives, supports booting and requires no drivers

  • Adds four SATA ports for extra desktop storage
  • Boots operating systems directly from connected drives
  • Works instantly with no driver installation needed
  • Fits 2.5 and 3.5 inch SSDs and HDDs
  • Stable circuit design keeps data transfer reliable

Four 6Gbps SATA ports added

This PCIe expansion card adds four independent SATA III ports to a desktop system. Each port delivers 6Gbps throughput for 2.5 and 3.5 solid-state or hard drives. It is aimed at builders who need more internal drive connections than the motherboard provides.

Stable signal under sustained transfers

The board uses a stable circuit design that maintains reliable signal transmission during continuous read and write workloads. No driver installation is required, so the card is recognised by the operating system immediately after the system starts. Long service life is supported by the component layout.

Bootable from any connected drive

The card fully supports system booting, letting you use an attached drive as the primary boot device. This single capability decides whether the adapter fits a build that must start from an added SATA drive. Buyers who do not need boot support from the extra ports should look elsewhere.

Highlights

  • Adds four SATA ports for extra desktop storage
  • Boots operating systems directly from connected drives
  • Works instantly with no driver installation needed
  • Fits 2.5 and 3.5 inch SSDs and HDDs
  • Stable circuit design keeps data transfer reliable

Specifications

No published specifications for this item yet.

Questions about this item

Does the SMUGDESK 4 Port PCIe to SATA 6Gbps Expansion Card run hot or draw much power during continuous all-day operation?

The card uses a stable circuit design for reliable signal transmission without active cooling, so it runs cool and draws minimal power from the PCIe slot during continuous use.

What must my desktop already have for this SMUGDESK SATA expansion card to work?

Your desktop needs an available PCIe slot and standard SATA data cables to connect up to four 2.5 or 3.5 drives, plus SATA power cables from your power supply.

Will this SMUGDESK card work reliably alongside my older 3Gbps SATA hard drives?

Yes, the SATA III ports are backward compatible with older SATA drives, allowing you to mix legacy 3Gbps drives with newer ones on the same card.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.