Super Flower
Super Flower Combat FG 1000W 80+ Gold ATX 3.1 Power Supply
Fully modular 1000 W ATX 3.1 unit with 80 Plus Gold efficiency, a 120 mm FDB fan, 140 mm depth and native 12V-2x6 PCIe 5.0 cable
- TypeATX3.1/ ATX3.0 Compatible
- Maximum Power1000 W
- Fans1 x 120 mm
- PFCActive
- Main Connector20+4 Pin
- +12V RailsSingle
Options ATX 3.1 80+ Gold (1000W) Black
- ATX 3.1 80+ Gold (750W) Black
- ATX 3.1 80+ Gold (850W) Black
- ATX 3.1 80+ Gold (1000W) Black
Struck-through versions exist but are not stocked here.
- Delivers 1000 W for demanding builds
- 80 PLUS Gold certified at 87% 90% 87% efficiency
- ATX 3.1 and PCIe 5.0 ready for modern GPUs
- Fully modular ribbon cables simplify cable management
- 120 mm fluid dynamic bearing fan with Japanese capacitors
1000 W ATX 3.1 power supply
This Super Flower Combat FG unit delivers 1000 W through a single +12 V rail and meets the ATX 3.1 and PCIe 5.0 specifications. It is 80 PLUS Gold certified with measured efficiencies of 87% at 20% load, 90% at 50% load and 87% at 100% load. The fully modular design uses ribbon cables and includes a native 12V-2x6 connector alongside five 6+2 pin PCIe plugs.
Builders who need ATX 3.1 compliance
The 140 mm depth fits many compact chassis, while the nine SATA connectors support multiple drives. Systems that require more than two CPU power connectors or more than six total PCIe connections will need a different unit. Buyers who want a shorter depth or a higher efficiency rating should look elsewhere.
Sustained load behaviour with a 120 mm FDB fan
Under continuous load the single 120 mm fluid dynamic bearing fan ramps to maintain thermal limits while the 100% Japanese capacitors keep voltage regulation tight. The active PFC and full-range 100–240 V input maintain stable operation across varying mains conditions. Efficiency stays at the certified 87% level at full rated load rather than dropping off after a short burst.
Highlights
- Delivers 1000 W for demanding builds
- 80 PLUS Gold certified at 87% 90% 87% efficiency
- ATX 3.1 and PCIe 5.0 ready for modern GPUs
- Fully modular ribbon cables simplify cable management
- 120 mm fluid dynamic bearing fan with Japanese capacitors
Specifications
| Brand | Super Flower |
|---|---|
| Type | ATX3.1/ ATX3.0 Compatible |
| Maximum Power | 1000 W |
| Fans | 1 x 120 mm |
| PFC | Active |
| Main Connector | 20+4 Pin |
| +12V Rails | Single |
| Max PSU Length | 140 mm |
| Modular | Full Modular |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Input Voltage | 100 - 240 V |
| 12V Power Connector | 2 x 4+4pin CPU |
| PCI-Express Connector | 5 x 6+2pin / 1 x Dual 6+2pin to 12V-2x6 |
| SATA Power Connector | 9 |
| Floppy Connector | 1 |
| Peripheral Connector | 4 |
Questions about this item
What case clearance do I need for the 140 mm PSU length?
The power supply is 140 mm long, so your chassis must provide at least that much depth behind the mounting bracket.
Will the 12V-2x6 cable work with my existing PCIe 5.0 graphics card?
The included dual 6+2-pin to 12V-2x6 cable is built for PCIe 5.0 GPUs and plugs directly into the 16-pin connector.
How do I confirm the fan is running in semi-passive mode after assembly?
With the 120 mm FDB fan, listen for startup spin-up; it should stay silent at low load and ramp up only when temperature rises.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
$324.03
0.00418449BTC
In stock