BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Supermicro
A 3U rackmount chassis holding sixteen 3.5″ hot-swap drives with redundant 1200 W Titanium 96%+ efficiency power supplies
This 3U Supermicro chassis fits standard racks and holds up to sixteen 3.5-inch SAS3 or SATA3 drives on a hot-swap backplane. Redundant 1200-watt Titanium-level power supplies with PMBus support keep the system running if one unit fails. Seven full-height expansion slots accept add-in cards for storage controllers or networking. Motherboards up to 13.68 by 13 inches, including ATX and E-ATX, are supported.
Dual 1200-watt power supplies operate at 96-percent-plus efficiency, reducing waste heat and lowering fan speed under typical loads. PMBus monitoring lets management software track power draw and supply health in real time. The redundant design means a single supply failure does not interrupt operation. Hot-swap drive trays allow drive replacement without powering down the chassis.
The sixteen-bay density replaces multiple smaller enclosures or a tower chassis that has run out of drive slots. Builders moving from non-hot-swap backplanes gain tool-less drive service and online capacity expansion. The 205-watt dual-processor support suits workloads that need more compute than a single-socket box provides. Sites without rack infrastructure or that need more than seven expansion slots should consider other form factors.
| Brand | SUPERMICRO |
|---|---|
| Model | CSE-836BE1C-R1K23B |
| Chassis Type | Rackmount |
| Form Factor | 3U |
| Motherboard Compatibility | Support motherboard up to 13.68" x 13", ATX, E-ATX |
| Power Supply | Redundant 1200W Titanium Level (96%+) efficiency power supplies w/ PMBus support |
| Features | 16 Hot-swap SAS3/SATA3 HDD Backplane with single or dual expander option 7x full height expansion slots 1200W Titanium Redundant Power Supply Slim optical drive or slim hot-swap SSD drive kit available Default support 205W X11 Dual Processors |
| Dimensions | 5.20" x 17.20" x 25.50" |
| Shipping weight | 9.07 kg |
| Package size | 686 × 483 × 178 mm |
Slide each drive into a front bay until the carrier locks, then verify both expander links are cabled if the dual-expander option is fitted — the second link is the step most often missed.
The redundant 1200W Titanium power supply modules are the primary field-replaceable units; fans and the backplane are also serviceable but the PSUs typically reach end-of-life first.
The dual 1200W Titanium units deliver 96%+ efficiency with PMBus monitoring; the 205W processor-support baseline indicates the thermal-power envelope the cooling is designed around.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?