We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server with four front 3.5-inch drive bays

Supermicro

Supermicro SYS-6018U-TR4T+ 1U rack server dual Xeon E5-2690 v4 768GB DDR4

SKU CH-DDKD-70DCQ

A 1U rack server with dual 14-core Xeon processors at 2.6GHz, 768GB DDR4 ECC memory, quad 10GBase-T ports, hardware RAID controller, and four hot-swap 3.5-inch drive bays

  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.60 GHz
  • CPU SocketLGA 2011-3
  • Number of CPU Cores14-Core Processor
  • Dual Xeon E5-2690 v4 14-core CPUs deliver 2.6GHz base speed
  • 768GB DDR4 2400MHz registered ECC memory across 24 DIMM slots
  • MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1GB cache
  • Quad 10GBase-T RJ45 ports via Intel X540 for high-speed networking
  • Redundant 750W platinum power supplies with hot-swap capability

Dense 1U dual-Xeon compute node

The Supermicro SYS-6018U-TR4T+ packs two 14-core Xeon E5-2690 v4 processors at 2.6 GHz and 768 GB of DDR4 2400 MHz ECC memory into a single rack unit. Redundant 750 W platinum power supplies and IPMI 2.0 with dedicated LAN keep the platform running under continuous load.

Suits memory-heavy multi-threaded tasks.

Dual 10 GbE RJ45 ports and the Matrox G200 graphics core make this system a natural fit for dense compute clusters and storage-heavy virtualization hosts. The 1U height leaves no room for full-height accelerator cards, so workloads needing GPU throughput should look elsewhere.

768 GB DDR4 ECC in 24 slots decides capacity ceiling

Twenty-four populated DIMM slots deliver 768 GB of registered ECC memory today, with the X10DRU-i+ board supporting up to 1.5 TB total. Buyers whose working set exceeds that ceiling must choose a platform with more memory channels or higher-density modules.

Highlights

  • Dual Xeon E5-2690 v4 14-core CPUs deliver 2.6GHz base speed
  • 768GB DDR4 2400MHz registered ECC memory across 24 DIMM slots
  • MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1GB cache
  • Quad 10GBase-T RJ45 ports via Intel X540 for high-speed networking
  • Redundant 750W platinum power supplies with hot-swap capability

Specifications

BrandSUPERMICRO
SeriesCSE-819U + X10DRU-i+
ModelSYS-6018U-TR4T+
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.60 GHz
CPU SocketLGA 2011-3
Number of CPU Cores14-Core Processor
# of Processors InstalledE5-2690 V4
Installed Memory Size768GB
Storage ControllerLSI MegaRAID 9361-8i Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerSupermicro AOC-UR-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports
Management PortRJ 45
Features4 x 3.5" SATA/SAS Hot-Plug Drive Bays

Questions about this item

How do I confirm the dual Xeon E5-2690 v4 CPUs and 768GB DDR4 memory are detected after installation?

Enter the BIOS or IPMI 2.0 interface to verify both 14-core processors and all 24 DIMM slots show 32GB modules at 2400MHz.

Which components are included and which drives must be purchased separately?

The system includes two CPUs, 768GB memory, MegaRAID 9361-8i controller, four 3.5-inch hot-plug trays, quad 10GBase-T ports, IPMI 2.0, and dual 750W PSUs; hard drives are not included.

Which RAID levels does the installed MegaRAID 9361-8i controller support for the four drive bays?

The controller supports RAID 0, 1, 5, 6, 10, 50, and 60 across the four 3.5-inch SATA/SAS bays.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.