We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server with twelve front drive bays, dual Xeon processors, 768GB DDR4 memory, redundant power supplies

Supermicro

Supermicro SYS-6028U-TR4T+ 2U rack server 2x Xeon E5-2697 v4 2.3GHz 18-core 768GB DDR4 12x 3.5" bays

SKU CH-000V-XF2KX

2U rack server with dual 18-core Xeon 2.3 GHz CPUs, 768 GB DDR4, 12 hot-swap 3.5" bays, MegaRAID 9361-8i and quad 10GBase-T networking

  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.30 GHz
  • CPU SocketLGA 2011-3
  • Number of CPU Cores18-Core Processor
  • Dual Xeon E5-2697 v4 processors deliver 36 cores at 2.3 GHz base with 3.6 GHz turbo
  • 768 GB DDR4 ECC registered memory across 24 slots provides high bandwidth for virtualization
  • MegaRAID 9361-8i controller supports RAID 0, 1, 5, 6, 10, 50, 60 with 1 GB cache and battery backup
  • Twelve hot-swap 3.5-inch SATA/SAS drive bays enable dense storage expansion
  • Quad 10GBase-T ports via Intel X540 plus dedicated IPMI 2.0 LAN give fast data and remote management

Dual Xeon 18-core 2U server

The Supermicro SYS-6028U-TR4T+ is a 2U rackmount system with two Intel Xeon E5-2697 v4 processors. Each CPU runs at 2.3 GHz with 18 cores and a 3.6 GHz turbo frequency. The chassis holds 768 GB of DDR4 memory across 24 slots and provides 12 hot-swap 3.5-inch bays for SATA or SAS drives. It targets virtualization, database and cloud workloads that need high core counts and large memory capacity.

MegaRAID 9361-8i installation

The LSI MegaRAID 9361-8i controller occupies a PCIe slot and uses an 8-port SAS interface with 1 GB cache and a battery backup unit. Drive trays slide into the front bays without tools, but the controller requires a low-profile bracket that must match the riser card layout. Missing or mismatched brackets are the most common fitment issue, and the battery module must be seated firmly to avoid cache errors on first boot.

Pre-order infrastructure check

Verify that your rack can accept a 2U unit with front-to-rear airflow and that the power distribution units can supply two 1000 W supplies on separate circuits. Confirm the network switch has four free RJ45 ports capable of 10GBase-T negotiation for the Intel X540 adapter. Ensure a dedicated IPMI LAN drop is available for the management port, and plan for the absence of front bezel and rack rails in the shipment.

Highlights

  • Dual Xeon E5-2697 v4 processors deliver 36 cores at 2.3 GHz base with 3.6 GHz turbo
  • 768 GB DDR4 ECC registered memory across 24 slots provides high bandwidth for virtualization
  • MegaRAID 9361-8i controller supports RAID 0, 1, 5, 6, 10, 50, 60 with 1 GB cache and battery backup
  • Twelve hot-swap 3.5-inch SATA/SAS drive bays enable dense storage expansion
  • Quad 10GBase-T ports via Intel X540 plus dedicated IPMI 2.0 LAN give fast data and remote management

Specifications

BrandSUPERMICRO
SeriesCSE-829UAC-R1K02-T
ModelSYS-6028U-TR4T+
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.30 GHz
CPU SocketLGA 2011-3
Number of CPU Cores18-Core Processor
# of Processors InstalledE5-2697 V4
Installed Memory Size768GB
Storage ControllerLSI MegaRAID 9361-8i Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerSuperMicro AOC-2UR-6-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports
Management PortRJ 45
Features12 x 3.5" SATA/SAS Hot-Plug Drive Bays

Questions about this item

How do I verify the 10GBase-T ports on the Intel X540 controller are active after installation?

Connect network cables to the four RJ45 ports on the AOC-2UR-6-i4XT card and check link lights; then confirm 10GBase-T operation in the OS network settings or IPMI 2.0 interface.

What comes with the server and which storage items must be purchased separately?

The system includes 24x 32GB DDR4 2400MHz ECC modules, 12x 3.5" SAS/SATA hot-plug trays, MegaRAID 9361-8i controller with 1GB cache and battery, dual 1000W Titanium PSUs, and IPMI 2.0 with dedicated RJ45 port; hard drives are not included.

Which memory configuration matches the installed 768GB capacity?

The server is populated with 24x 32GB DDR4 2400MHz Registered ECC DIMMs filling all slots for the full 768GB.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.