We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
4U rack server with 24 front 3.5 inch drive bays

Supermicro

Supermicro SYS-8048B-TRFT 24x 3.5" 4U rack server 4x Xeon E7-4850 v4 2.1GHz 16-core 512GB DDR4 9361-8i

SKU CH-V1FH-PT2EW

4U rack server with four Xeon E7-4850 v4 16-core processors, 512GB DDR4, 24 hot-swap 3.5" bays and a MegaRAID 9361-8i controller

  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.80 GHz
  • CPU SocketLGA 2011
  • Number of CPU Cores16-Core Processor
  • Quad-socket Xeon power for heavy workloads
  • 512 GB DDR4 ECC memory at 2400 MHz
  • 24 hot-swap 3.5" bays for massive storage
  • MegaRAID 9361-8i with 1 GB cache and battery
  • Dual 10 GbE ports plus IPMI 2.0 management

Quad-socket Xeon 4U server

The Supermicro SYS-8048B-TRFT is a 4U rackmount system populated with four Intel Xeon E7-4850 v4 processors. Each CPU runs at 2.1 GHz with a 2.8 GHz turbo frequency and provides 16 cores. The chassis holds 512 GB of DDR4 2400 MHz registered ECC memory across 32 modules.

Suits storage-heavy workloads; not for GPU compute

This server targets environments that need dense 3.5-inch drive capacity and quad-socket CPU throughput. Twenty-four hot-swap bays accept SATA or SAS drives behind an LSI MegaRAID 9361-8i controller with 1 GB cache. The Matrox G200 graphics core offers only basic video output, so the platform does not suit GPU-accelerated tasks.

24 hot-swap 3.5-inch bays drive the storage decision

The defining specification is the front-accessible bay count: twenty-four 3.5-inch trays supporting SATA and SAS media. No drives are installed, so capacity scales with the disks you add. The eight-port RAID controller manages RAID 0, 1, 5, 6, 10, 50 and 60 across those bays.

Highlights

  • Quad-socket Xeon power for heavy workloads
  • 512 GB DDR4 ECC memory at 2400 MHz
  • 24 hot-swap 3.5" bays for massive storage
  • MegaRAID 9361-8i with 1 GB cache and battery
  • Dual 10 GbE ports plus IPMI 2.0 management

Specifications

BrandSUPERMICRO
SeriesCSE-848X + X10QBi-R1.01A
ModelSYS-8048B-TRFT
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.80 GHz
CPU SocketLGA 2011
Number of CPU Cores16-Core Processor
# of Processors InstalledE7-4850 V4
Installed Memory Size512GB
Storage ControllerLSI MegaRAID 9361-8i Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerSuperMicro AOC-STG-i2T - Intel X540 - 2x RJ45 10GBase-T Ports
Management PortRJ 45
Features24 x 3.5" SATA/SAS Hot-Plug Drive Bays

Questions about this item

How loud and hot does the 4U chassis get with four 1620 W power supplies running 24/7?

Four 1620 W platinum supplies share the load, and the 4U height allows larger fans to move air at lower RPM, keeping noise and heat lower than a denser 1U or 2U design.

Which drives and cables must I supply to use the 24 hot-swap bays and the 9361-8i controller?

The 24 front bays accept 3.5" SATA or SAS drives; the MegaRAID 9361-8i provides eight 12 Gb/s SAS ports, so you need SAS or SATA drives and matching cables for the remaining bays.

Will the X540 10GBase-T ports and IPMI 2.0 work with my older Cat 5e patch panel and KVM switch?

The two X540 RJ45 ports run 10GBase-T and negotiate down to 1 Gb/s on Cat 5e, while the dedicated IPMI 2.0 RJ45 port works with any standard KVM-over-IP client.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.