We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tower cooler with black top cover and dual 120 mm red LED fans

SXDOOL

SXDOOL RR-T4PR-16PR-C1 Blizzard T400 Pro Red CPU Cooler

SKU CH-DDP1-SNZY2

Dual 120 mm red LED PWM fans push 66.3 CFM through four direct-contact heat pipes and 57 aluminium fins for 160 mm clearance

  • TypeCase Fan Accessory
  • Bearing TypeRifle
  • RPM600-1600RPM(PWM)±10%
  • Air Flow66.3 CFM ± 10% (@ 1600RPM)
  • Noise Level9-31 dBA
  • Power Connector(2pc) 4 Pin
  • Dual 120 mm PWM fans deliver up to 66.3 CFM airflow
  • Four direct-contact copper heat pipes draw heat from the CPU quickly
  • Rifle-bearing fans run as quietly as 9 dBA at low speed
  • Universal mounting kit fits Intel LGA 2011, 1366, 115x, 775 and AMD FM2+, FM1, AM3+, AM3, AM2+
  • Compact 160 mm height clears most cases and memory slots

Red LED CPU Cooler with Dual 120 mm PWM Fans

The Blizzard T400 Pro Red pairs two 120 mm XtraFlo fans with a 160 mm tall heatsink that uses four direct-contact copper heat pipes and 57 aluminium fin stacks. Rifle-bearing fans spin between 600 and 1600 RPM, delivering up to 66.3 CFM at a noise range of 9 to 31 dBA. Red LED lighting and a red top cover add visual accent to the black frame. A quick-snap bracket simplifies installation on supported sockets.

Suited for Mid-Range Builds Needing RGB Flair

Builders who want a compact air cooler with addressable-style red illumination and PWM control will fit this unit in cases allowing 160 mm cooler height. The dual-fan layout helps with moderate overclocks on mainstream desktop processors. Systems requiring higher thermal capacity, liquid-cooling aesthetics, or cases limited to coolers shorter than 160 mm should consider other solutions. The 846 g weight is manageable for standard motherboard mounting.

160 mm Cooler Height Decides Case Compatibility

The heatsink measures 116 x 60 x 160 mm, so the 160 mm maximum height is the single dimension that determines whether the cooler clears your side panel and memory modules. Verify your chassis specification against this figure before purchase. Universal mounting hardware covers Intel LGA 2011-v3, 2011, 1366, 115x and 775 plus AMD FM2+, FM2, FM1, AM3+, AM3 and AM2+.

Highlights

  • Dual 120 mm PWM fans deliver up to 66.3 CFM airflow
  • Four direct-contact copper heat pipes draw heat from the CPU quickly
  • Rifle-bearing fans run as quietly as 9 dBA at low speed
  • Universal mounting kit fits Intel LGA 2011, 1366, 115x, 775 and AMD FM2+, FM1, AM3+, AM3, AM2+
  • Compact 160 mm height clears most cases and memory slots

Specifications

BrandCOOLER MASTER
SeriesBlizzard T400 Pro(Red)
ModelRR-T4PR-16PR-C1
TypeCase Fan Accessory
Bearing TypeRifle
RPM600-1600RPM(PWM)±10%
Air Flow66.3 CFM ± 10% (@ 1600RPM)
Noise Level9-31 dBA
Power Connector(2pc) 4 Pin
ColorBlack
LEDRed

Questions about this item

How tall is the Blizzard T400 Pro Red cooler and will it fit in my case?

The cooler reaches 160 mm in height, so check that your case allows at least 160 mm of CPU-cooler clearance.

Which way do the dual 120 mm XtraFlo fans face when I snap them onto the heatsink?

The quick-snap brackets mount the fans horizontally, pushing air through the 57 aluminium fin stacks toward the rear exhaust.

Do the four direct-contact copper heat pipes ever need refilling or replacement?

No, the sealed heat pipes are maintenance-free; only the two 120 mm rifle-bearing fans may need cleaning or eventual replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.