We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black standalone USB duplicator with LCD screen and 39 slots

Systor

Systor SYS-USB30-39 USB 3.0/3.1 Duplicator 1 to 39

SKU CH-K2ED-DF6KV

Standalone duplicator copies one USB drive to 39 targets at up to 300 MB/s with bit-by-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 39
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 39

Show 7 more configurations

Struck-through versions exist but are not stocked here.

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copies up to 39 USB drives simultaneously
  • Standalone operation requires no host computer
  • 18 GB per minute asynchronous duplication speed
  • Bit-by-bit compare verifies every copy
  • LCD with four-key control simplifies operation

USB 3.0/3.1 Duplicator — 1-to-39 targets

This standalone unit copies one USB flash drive to up to thirty-nine targets at once. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches up to 300 MB/s transfer speed. A 256 MB buffer and LCD control panel let the operator run quick or whole-media copies without a host computer. Bit-by-bit compare verifies every duplication.

Suited for high-volume USB duplication.

IT departments, duplication services and OEMs that need to provision dozens of flash drives in a single run will benefit from the thirty-nine synchronous and asynchronous channels. Buyers who need to duplicate SD cards, optical discs or internal drive formats should look at a different product. The unit only accepts USB flash drives inserted into its front-loading slots.

39-target capacity decides fit

The single specification that determines suitability is the maximum target count of thirty-nine. If the workflow requires more simultaneous copies, this duplicator cannot meet the demand; if fewer targets are typical, the extra ports remain available for future scaling. No other figure in the data sheet changes this core constraint.

Highlights

  • Copies up to 39 USB drives simultaneously
  • Standalone operation requires no host computer
  • 18 GB per minute asynchronous duplication speed
  • Bit-by-bit compare verifies every copy
  • LCD with four-key control simplifies operation

Specifications

BrandSystor
ModelSYS-USB30-39
TypeUSB Flash Drive Duplicator
Target1 to 39
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What type of USB flash drives do I need to use as source and targets for the Systor SYS-USB30-39?

The duplicator supports USB 1.1, 2.0, 3.0, and 3.1 flash drives for both the source and up to 39 target ports.

Can I mix older USB 2.0 drives with newer USB 3.1 drives during the same copy session?

Yes, the unit handles mixed USB 1.1, 2.0, 3.0, and 3.1 media simultaneously across its 39 target slots.

How do I verify that each target drive is an exact match of the source after the copy finishes?

The LCD screen runs a bit-by-bit compare function and displays the verification result for every port once the operation completes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.