We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 120 mm fans with reversed blades and addressable RGB lighting in a pack

Thermaltake

Thermaltake CL-F194-PL12SW-A CT120 EX ARGB Reverse 120 mm White 3-Fan Pack

SKU CH-NY08-5R4SA MPN CL-F194-PL12SW-A

Three 120 mm white case fans with reversed blades, magnetic daisy-chain connections, 9 addressable LEDs and 5 V motherboard sync deliver 65.82 CFM airflow and 1.87 mm-H2O static pressure at 31.2 dBA

  • TypeCase Fan
  • Fan Size120mm
  • ColorWhite
  • Reversed blades show RGB from any airflow direction
  • Magnetic MagForce 2.0 links fans quickly with larger contact pads
  • 82 CFM airflow and 1.87 mm-H2O pressure at 2000 RPM
  • Quiet 31.2 dBA operation with anti-vibration rubber pads
  • 9 addressable LEDs sync 16.8 million colours via motherboard software

White ARGB fans with reversed blades

The Thermaltake CT120 EX ARGB Reverse 120 mm White 3-Fan Pack delivers addressable RGB lighting visible from both airflow directions. Reversed blades push air from rear to front while keeping all nine LEDs in view. Each fan spins at 2000 RPM to produce 65.82 CFM airflow and 1.87 mm-H2O static pressure at 31.2 dBA. The pack suits builders who want coordinated lighting on radiators or case intake without hiding the glow.

Magnetic daisy-chain cuts cable clutter

MagForce 2.0 uses larger magnetic contact pads to snap fans together in seconds, so only one 5 V ARGB header and one PWM header are needed for the trio. Alignment is tactile; mis-seating is rare. The only common snag is forgetting to enable 5 V addressable mode in motherboard software, which leaves LEDs stuck on a default rainbow. Anti-vibration rubber pads on each corner keep transmitted noise low once mounted.

5 V ARGB header limits chain length

The 5 V 3-pin ARGB interface caps practical daisy-chains at the three fans included; adding more risks voltage drop and colour inconsistency. Motherboard sync software from ASUS, MSI, Gigabyte, Biostar and ASRock controls the 16.8 million colours, but proprietary 12 V RGB headers will not work. Builders needing longer runs or 12 V RGB control should look elsewhere.

Highlights

  • Reversed blades show RGB from any airflow direction
  • Magnetic MagForce 2.0 links fans quickly with larger contact pads
  • 82 CFM airflow and 1.87 mm-H2O pressure at 2000 RPM
  • Quiet 31.2 dBA operation with anti-vibration rubber pads
  • 9 addressable LEDs sync 16.8 million colours via motherboard software

Specifications

TypeCase Fan
Fan Size120mm
ColorWhite
Shipping weight0.82 kg
Package size152 × 135 × 89 mm

Questions about this item

How can I confirm the fans are running at the rated 2000 RPM and 31.2 dBA after installation?

Check the RPM reading in your motherboard BIOS or monitoring software; it should show up to 2000 RPM. The 31.2 dBA figure is the manufacturer’s rated maximum noise level under standard test conditions.

What comes in the 3-fan pack and what extra parts are needed for ARGB control?

The pack includes three 120 mm white CT120 EX ARGB Reverse fans with MagForce 2.0 magnetic connectors and anti-vibration rubber pads. A motherboard with a 5 V addressable RGB header is required for lighting control.

Which version should I choose if I want the reversed-blade design with magnetic daisy-chaining?

This CL-F194-PL12SW-A pack is the white CT120 EX ARGB Reverse model with MagForce 2.0; it delivers 65.82 CFM airflow, 1.87 mm-H2O static pressure and 9 addressable LEDs per fan for 5 V motherboard sync.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.