We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Thermaltake

Thermaltake TH420 V2 Ultra ARGB Snow CL-W407-PL14SW-A liquid cooler

SKU CH-S0GV-0T2KK MPN CL-W407-PL14SW-A

A 420 mm all-in-one liquid cooler with three 140 mm PWM fans, a copper cold plate and addressable RGB lighting in white

  • TypeLiquid Cooling System
  • Block CompatibilityIntel LGA 2066/2011-3/2011/1851/1700/1200/1156/1155/1151/115
  • Block MaterialCopper
  • Radiator Size456 x 139 x 27 mm
  • Radiator MaterialAluminum
  • Fan Size3 Fan Slots (140 mm)

Fan Size 3 Fan Slots (140mm)

Struck-through versions exist but are not stocked here.

Color White

  • Broad CPU support across Intel and AMD sockets
  • Copper cold plate transfers heat efficiently from the processor
  • 456 mm radiator length provides large surface area for dissipation
  • Three 140 mm PWM fans deliver 84.32 CFM each at up to 1800 RPM
  • ARGB lighting on a white finish adds customisable colour to the build

All-in-one liquid cooler for mainstream sockets

The Thermaltake TH420 V2 Ultra ARGB Snow is a closed-loop liquid cooler built around a 456 x 139 x 27 mm aluminum radiator and a copper cold plate. It mounts on Intel LGA 2066, 2011-3, 2011, 1851, 1700, 1200, 1156, 1155, 1151, 1150 and AMD AM5, AM4, AM3+, AM3, AM2+, AM2, FM2, FM1 platforms. The white finish and addressable RGB lighting suit clean, light-themed builds.

White tubing and ARGB fans simplify cable routing

Three 140 x 140 x 25 mm PWM fans are pre-installed on the radiator, each spinning between 500 and 1800 R.P.M and moving 84.32 CFM. Rubber tubes run 460 mm from the block to the radiator, giving enough length for most mid-tower layouts while the white sleeves keep the loop visually consistent. Standard 140 mm fan spacing means the unit drops into any case with triple 140 mm top or front mounts.

PWM curve keeps noise low at idle

At full speed the fans reach 34.7 dB-A, a level that stays unobtrusive in a typical system. The 500 R.P.M floor lets the cooler run near-silent during light loads, while the 1800 R.P.M ceiling provides headroom for sustained CPU workloads. Power draw follows the PWM signal, so the cooler only consumes what the current thermal demand requires.

Highlights

  • Broad CPU support across Intel and AMD sockets
  • Copper cold plate transfers heat efficiently from the processor
  • 456 mm radiator length provides large surface area for dissipation
  • Three 140 mm PWM fans deliver 84.32 CFM each at up to 1800 RPM
  • ARGB lighting on a white finish adds customisable colour to the build

Specifications

BrandThermaltake
SeriesTH420 V2 Ultra ARGB Snow
ModelCL-W407-PL14SW-A
TypeLiquid Cooling System
Block CompatibilityIntel LGA 2066/2011-3/2011/1851/1700/1200/1156/1155/1151/1150
AMD AM5/AM4/AM3+/AM3/AM2+/AM2/FM2/FM1
Block MaterialCopper
Radiator Size456 x 139 x 27 mm
Radiator MaterialAluminum
Fan Size3 Fan Slots (140 mm)
Fan Dim.140 x 140 x 25 mm
Fan RPMPWM 500~1800 R.P.M
Fan Air Flow84.32 CFM (one fan)
Fan Noise34.7dB-A
ColorWhite
LED ColorARGB
Tube Dim.Length: 460mm
Tube MaterialRubber
Shipping weight2.90 kg
Package size527 × 210 × 159 mm

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What socket standard does the TH420 V2 Ultra ARGB Snow block support and what does that limit in practice?

The copper cold plate fits Intel LGA 1851, 1700, 1200, 1150, 1151, 1155, 1156, 2011, 2011-3, 2066 and AMD AM5, AM4, AM3+, AM3, AM2+, AM2, FM2, FM1, so the cooler is limited to those desktop platforms.

What are the radiator dimensions and how many 140 mm fan slots does the case need?

The aluminum radiator measures 456 x 139 x 27 mm and provides three 140 mm fan slots, so the case must accept a 456 mm long triple-fan radiator.

How is the cooler installed and which step is often done wrong?

Mount the backplate and standoffs for the specific socket, apply paste, seat the pump block, secure the radiator with three 140 mm fans, connect the PWM fan header and the ARGB cable to a 5 V header; the step most often missed is plugging the ARGB lead into the motherboard 5 V addressable header instead of a 12 V RGB header.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.